Dell PowerConnect M6220 Configuration Manual

Also see for PowerConnect M6220: Release notes Configuration guide Cli reference guide Configuration guide Release note

Contents

Routing Configuration 73ipv6 address 3000:3:100::/64 eui64ip ospf area 0.0.0.0ipv6 ospfexit• Define an OSPF router:ipv6 router ospfrouter-id 3.3.3.3exitrouter ospfrouter-id 3.3.3.3exitexitConfigure Router B: Router B is a ABR that connects Area 0 to Areas 1 and 2.• Configure IPv6 and IPv4 routing. The static routes are included for illustration only: Redistributedstatic routes, like routes distributed from other protocols, are not injected into stub areas such as Area1:(console)#configureipv6 unicast-routingipv6 route 3000:44:44::/64 3000:2:3::210:18ff:fe82:c14ip route 10.23.67.0 255.255.255.0 10.2.3.3• On VLANs 10, 5, and 17, configure IPv4 and IPv6 addresses and enable OSPF on the interfaces. ForIPv6, associate interface 1 with Area 1 and interface 17 with Area 2. (OSPF is enabled on the IPv4VLAN routing interface in the next code group.)interface vlan 10routingip address 10.1.2.2 255.255.255.0ipv6 address 3000:1:2::/64 eui64ipv6 ospfipv6 ospf areaid 1exitinterface vlan 5routingip address 10.2.3.2 255.255.255.0ipv6 address 3000:2:3::/64 eui64ipv6 ospfexitinterface vlan 17routingip address 10.2.4.2 255.255.255.0ipv6 address 3000:2:4::/64 eui64ipv6 ospfipv6 ospf areaid 2exit