196 Configuring System InformationConfiguring Users in a Remote RADIUS ServerYou can use a remote RADIUS server client authorization. You must add all users to the RADIUS server.The local database does not share any information with the remote RADIUS database.The following table indicates the RADIUS attributes you use to configure authorized captive portalclients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA). VSAs aredenoted in the Attribute column and are comma delimited (vendor id, attribute id).User GroupYou can assign Local Users to User Groups that you create. If the Verification Mode is Local or RADIUS,you assign a User Group to a CP Configuration. All users who belong to the group are permitted toaccess the network through this portal. The User Group list is the same for all CP configurations on theswitch.To view and configure User Groups, click System > Captive Portal > User Group.Table 6-1. Captive Portal User RADIUS AttributesAttribute Number Description Range Usage DefaultUser-Name 1 User name to be authorized 1-32 characters Required NoneUser-Password 2 User password 8-64 characters Required NoneSession-Timeout 27 Logout once session timeoutis reached (seconds). If theattribute is 0 or not presentthen use the value configuredfor the captive portal.Integer (seconds) Optional 0Idle-Timeout 28 Logout once idle timeout isreached (seconds). If theattribute is 0 or not presentthen use the value configuredfor the captive portal.Integer (seconds) Optional 0
