114 | Configuration Reference Dell PowerConnect W-AirWave 7.5 | Configuration GuideProfiles > RF > 802.11a/g Radio > HT RadioPerform these steps to create or edit High Throughput (HT) Radio profiles.1. Select Profiles > RF > HT Radio in the Navigation pane.2. Select the Add button to create a new HT Radio profile, or click the pencil icon to edit an existing profile.Complete the settings as described in Table 55:3. Select Add or Save. The added or edited profile appears on the Profiles > RF > HT Radio page.Profiles > RF > 802.11a/g Radio > SpectrumPerform these steps to create or edit Spectrum profiles.1. Select Profiles > RF > Spectrum in the Navigation pane.2. Select the Add button to create a new Spectrum profile, or click the pencil icon to edit an existing profile.Complete the settings as described in Table 56:Table 55 Profiles > RF > HT Radio Profile SettingsField Default DescriptionGeneral SettingsFolder Top Set the folder with which the profile is associated. The drop-down menu displays all foldersavailable for association with the profile.Name Blank Enter the name of the profile.Other Settings40 MHz Intolerance No Allows a radio using this profile to stop using the 40 MHz channels if the 40 MHz intoleranceindication is received from another AP or station.Honor 40MHzIntoleranceYes Select 40 MHz intolerance if you want to enable 40 MHz intolerance. Thisparameter controls whether or not APs using this high-throughput profile will advertiseintolerance of 40 MHz operation. By default, this option is disabled and 40 MHz operation isallowed.Legacy StationWorkaroundNo Use this setting to allow or disallow associations from legacy (non-HT) stations.NOTE: This profile depends on the controller having an RF protect license and a minimum version of 6.0.0.0Table 56 Profiles > RF > Spectrum Profile SettingsField Default DescriptionGeneral SettingsName Blank Enter the name of the profile.
