Dell PowerConnect W-AirWave 7.5 | Configuration Guide Dell PowerConnect W Configuration in AirWave | 17Figure 16 Dell PowerConnect W Configuration > Dell PowerConnect W AP Groups > Add/Edit Details Page(Partial View)For additional information about configuring Dell PowerConnect W AP Groups, see “Dell PowerConnectW AP Groups Procedures and Guidelines” on page 218. Add or edit WLANs in Dell PowerConnect W Configuration as required.a. Navigate to the Dell PowerConnect W Configuration > WLANs page. This page can display all WLANscurrently configured, or can display only selected WLANs.b. Click Add to create a new WLAN, or click the pencil icon to edit an existing WLAN.You can add or edit WLANs in one of two ways, as follows: Basic—This display is essentially the same as the ArubaOS Wizard View on the Dell PowerConnectW-Series controller. This page does not require in-depth knowledge of the profiles that define the DellPowerConnect W AP Group. Advanced—This display allows you to select individual profiles that define the WLAN and associatedDell PowerConnect W AP Group. This page requires in-depth knowledge of all profiles and theirrespective settings.The following sections of this configuration guide provides additional information and illustrations forconfiguring WLANs: “General WLAN Guidelines” on page 22 “WLANs” on page 40 in the Appendix for details on all WLAN settings9. Add or edit Dell PowerConnect W Configuration Profiles as required.a. Navigate to Dell PowerConnect W Configuration > Profiles section of the navigation pane.b. Select the type of profile in the navigation pane to configure: AAA, AP, Controller, IDS, Mesh, QoS, RF,or SSID.c. Click Add from any of these specific profile pages to create a new profile, or click the pencil icon to edit anexisting profile.Most profiles in AirWave are similar to the All Profiles display in the Dell PowerConnect W-Seriescontroller WebUI. The primary difference in AirWave is that AAA and SSID profiles are not listed underthe WLAN column, but under Profiles.d. Save changes to each element as you proceed through profile and WLAN configuration.
