102 | Configuring and Using Device Groups in AirWave Dell PowerConnect W-AirWave 7.4 | User Guidemultiple devices to another group and/or folder, update credentials and optimize channels. Perform these steps tomodify multiple devices.1. To modify multiple devices, go to one of the following pages with a device list: APs/Devices > List APs/Devices > Up APs/Devices > Down APs/Devices > Mismatched Groups > Monitor configuration pagesEach of these pages displays a list of devices. Controller monitoring pages also have lists of their thin APswhich can be modified using Modify Devices.2. Select Modify Devices to make the checkboxes at the left of all devices appear. In addition, a new sectionappears in this page location to display various settings that can be configured for multiple devices at one time(some operations cannot be performed on the selected devices). Figure 63 illustrates this page.Figure 63 Modify Multiple Devices Section Illustration3. Select one or more devices that are to share the configurations. Select the checkbox for each device to modify.4. In the Modify Multiple Devices section, select any button or use any drop-down menu for the supportedchanges. Any action you take applies to all selected devices. Each action you take will direct you to a newconfiguration page, or prompt you with a confirmation page to confirm your changes.
