118 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide RF Dashboard Usage TrendsInfoThe Info section displays the following information about the Virtual Controller: Name - Virtual Controller name. Country Code - Country in which the Virtual Controller is operating. IP address - IP address of the Virtual Controller. Content filtering - Status of the Content Filtering feature: Enabled or Disabled. Organization - Name of the organization. AirWave IP - IP address of the AirWave server. Band - Band in which the virtual controller is operating: 2.4 GHz band, 5.4 GHz band, or both. NTP server - IP address of the NTP server.RF DashboardThe RF Dashboard section displays the following information: IP address, Signal, and Speed information about the clients in the Dell Instant network. If the speed or signalstrength of a client is low, IP address of the client appears as a link. Click the link to monitor the client. Formore information, see “Client View” on page 125. Instant Access Points, Utilization, Noise, and Errors information about the IAPs in the Dell Instant network.If utilization, noise or errors of an IAP are not within the specified threshold, the IAP name appears as a link.Click the link to monitor the IAP. For more information, see “Instant Access Point View” on page 122.Usage TrendsThe Usage Trends section displays the following graphs for the virtual controller: Clients GraphFigure 92 Clients Graph Throughput Graph
