28 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide IDS Status - Displays WLAN Interface, Data Structures, WLAN Interface Switch Status and RTLSConfiguration tables for the selected IAP. IDS AP Table - Displays the Monitored IAP Table, which lists all the IAPs monitored by the selected IAP. ARM Bandwidth Management - Displays bandwidth management information for the selected IAP. ARM History - Displays the history of channel and power changes due to Adaptive Radio Management(ARM) for the selected IAP. ARM Neighbors - Displays the ARM settings for the selected IAP's neighbors. ARM RF Summary - Displays the state and statistics for all channels being monitored by the selected IAP. ARM Scan Times - Displays AM channel scan times for the selected IAP.Use this command under the supervision of Dell technical support to help debug process errors.Figure 14 Support BoxHelpThe Help link at the top right corner of the Instant UI allows you to view a short description or definition ofselected terms and fields in the Instant UI. To activate the context-sensitive help, perform the following steps:1. At the top right corner of Instant UI, click the Help link. The following box appears below the Help link.Figure 15 Help Link2. Click any text or term displayed in green italic to view its description or definition.3. To disable the help mode, click the Done button.LogoutUse this link to logout of the Instant UI.MonitoringThis link displays the Monitoring pane. This pane can be used to monitor the Dell Instant network. Use the downarrow located to the right side of these links to compress or expand the monitoring pane. The monitoringpane consists of the following sections: Info
