Dell PowerEdge 1855 Configuration Manual

Also see for PowerEdge 1855: Use guide Information update Quick start guide User guide Installation and troubleshooting guide

Contents

Dell PowerEdge 1855 Configuration Manual Manual pdf 19 page image

General System Configuration 17InputTable 1-2 describes the fwupdate subcommand options.OutputStatus of the TFTP upload can only be seen from a serial connection to the DRAC/MC since theDRAC/MC Telnet and web server services are shut down during the upload. This is to ensure thatthe card does not receive interrupts that might impact the firmware update.NOTE: You can download a TFTP server from http:\\solarwinds.net. For information on installingand configuring the SolarWinds TFTP server, refer to the SolarWinds website.Integrating the System Into the NetworkYour system is essentially a self-contained network. Table 1-3 and Table 1-4 show the mappingof the internal and external ports.Table 1-2. fwupdate Subcommand OptionsOption Description-a The IP Address option specifies the IP address of the TFTP server.-d The -d option specifies the path and filename of the firmware update file on the TFTP server.-D After the update is complete, reset all firmware configuration parameters to the defaultvalues. For more information, see "racresetcfg" in the Dell Remote Access Controller/ModularChassis User’s Guide.Table 1-3. Internal Network Port MappingModule Port I/O Bay 1 I/O Bay 2Server module 1LOM 1 1/1LOM 2 1/1Server module 2LOM 1 1/2LOM 2 1/2Server module 3LOM 1 1/3LOM 2 1/3Server module 4LOM 1 1/4LOM 2 1/4