|
Configuring the KVM Switch Module 31To set a screen delay time for OSCAR:1 Type in the number of seconds (0-9) you want to delay display of OSCAR after you press. Entering <0> will instantly launch OSCAR with no delay.2 Click OK.Setting a time to delay display of OSCAR allows you to complete a soft switch without OSCARdisplaying. To perform a soft switch, see "Soft Switching."Controlling the Status FlagThe status flag displays on your desktop and shows the name of the selected server module or thestatus of a slot. Use the Flag dialog box to configure the flag to display by server module name,or to change the flag color, opacity, display time, and location on the desktop.To access the Flag dialog box:1 Press .2 Click Setup - Flag.Displaying Version InformationUse the Version dialog box to display the KVM switch firmware, hardware and FPGA versions,and to identify the language and keyboard configuration. For optimum performance, keep yourfirmware current.To display version information:1 Press .2 Click Commands - Display Versions.3 The top half of the Version box lists the subsystem versions in the KVM switch.4 Click X or press to close the Version dialog box.Setting Console SecurityOSCAR enables you to set security on your KVM switch console. You can establish a screen savermode that engages after your console remains unused for a specified delay time. Once engaged,your console will remain locked until you press any key or move the mouse. You will then need totype in your password to continue.Use the Security dialog box to lock your console with password protection, set or change yourpassword, and enable the screen saver.To access the Security dialog box:1 Press .2 Click Setup - Security.NOTE: If a password has been previously set, the user will have to enter the password before being ableto access the Security dialog box.
|
