Dell PowerEdge 4200 Service Manual

Also see for PowerEdge 4200 Series: Rack installation Rack installation Installation guide User guide Installation and troubleshooting guide

Contents

Dell PowerEdge 4200 Service Manual Manual pdf 85 page image

System Setup Program A-7Table A-4. Advanced Menu CategoriesCategory FunctionSerial Port 1 orSerial Port 2Configures system’s built-in serial ports.Parallel Port Configures system’s built-in parallel port.The port’s I/O address may be set to: 278h,IRQ5; 3BCh, IRQ7; 378h, IRQ7. Other-wise, the port may be disabled.Parallel Mode Controls whether system’s built-in parallelport acts as an AT-compatible (OutputOnly), PS/2-compatible (Bidirectional), orECP (Extended Capabilities Port).Diskette Controller Enables system’s built-in diskettecontroller.On-Board SCSI A Enables or disables the built-in SCSI 7880Ultra/Wide controller and determines if it isscanned as a boot drive.On-Board SCSI B Enables or disables the built-in SCSI 7860Ultra/Narrow controller and determines ifit is scanned as a boot drive.PCI Scan Sequence Determines the sequence in which the PCIdevices are scanned to find a boot device(default is Embedded devices first).Use MP Specification Determines the microprocessor-specification revision level: either 1.1 or1.4 (default).PS/2 Mouse Enables or disables the built-in mousecontroller.