22 PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.26 Environment One: Basic VLT deployment with VLTmodeIn this section, a basic VLT deployment (Figure 18) is created using the low-touch VLT mode. Thepurpose of this topology is to present the concept of VLT and how to enable it.VLT DomainVLTiFC630 ServerFN IOMFN IOMInfrastructureTe 0/9Te 0/11Te 0/11Te 0/1Te 0/1Te 0/9Te 0/10Te 0/10VLT deployment with FN 410S IOMIn the diagram above, internal port Te0/1 and external ports Te0/10 and Te0/11 are VLT members onboth IOMs.Note: If an IOM has been previously configured, existing configuration settings will be retained afterchanging IOM modes. Because of this, it is recommended that the IOMs be returned to factorydefaults before configuring to a different mode. See the Reset FN IOM to Default FactoryConfiguration section for instructions on setting an IOM back to factory defaults.
