Fibre channel port speed indicator Indicator StatusOff 1 Gb link establishedGreen on 2 Gb link establishedAmber on 4 Gb link establishedModule statusindicator Indicator StatusOff Module is off or enclosure power is offGreen on All ports are ready for useAmber on Module is being reset, or ports are offlineGreen/amber blinking Diagnostic message is in error log, or environmental range isexceededModule power indicator Indicator StatusOff Power to the module is offGreen Module has powerStatus/identification indicator Indicator StatusBlue on Primary module in a stack, if applicableBlue off Secondary module in a stackAmber flashing Fault condition in moduleBrocade M5424 FC8 I/O ModuleThe Brocade M5424 FC8 I/O module includes eight external autosensing fibre channel ports (four ports are enabled inthe standard configuration and four additional ports may be enabled as an optional upgrade), 16 internal ports, and oneserial port with an RJ-45 connector. The external fibre channel ports operate at 8 Gb/sec, 4 Gb/sec, or 2 Gb/sec.NOTE: CMC firmware version 1.3 is required to support FC8 mezzanine cards and I/O modules.NOTE: This fibre channel switch module includes Short Wave SFP optical transceivers. To ensure properfunctionality, use only SFPs provided with this module.67
