– The following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).A message prompts you to re-enter the system password.6. Re-enter the system password that you entered earlier and click OK.7. Select Setup Password, enter your system password and press or .A message prompts you to re-enter the setup password.8. Re-enter the setup password that you entered earlier and click OK.9. Press to save the changes.NOTE: Password protection does not take effect until the system reboots.Using Your System Password To Secure Your SystemNOTE: If you have assigned a setup password, the system accepts your setup password as an alternate systempassword.1. Turn on or reboot your system.2. Type your password and press .When Password Status is Locked, type the password and press when prompted at reboot.If an incorrect system password is entered, the system displays a message and prompts you to re-enter your password.You have three attempts to enter the correct password. After the third unsuccessful attempt, the system displays anerror message that the system has halted and must be powered down.Even after you shut down and restart the system, the error message is displayed until the correct password is entered.NOTE: You can use the Password Status option in conjunction with the System Password and Setup Passwordoptions to protect your system from unauthorized changes.Deleting Or Changing An Existing System And/Or Setup PasswordEnsure that the Password jumper is set to enabled and the Password Status is Unlocked before attempting to delete orchange the existing System and/or Setup password. You cannot delete or change an existing System or Setup passwordif the Password Status is Locked.To delete or change the existing System and/or Setup password:1. To enter System Setup, press immediately after a power-on or reboot.2. In the System Setup Main Menu, select System BIOS and press .The System BIOS screen is displayed.3. In the System BIOS Screen, select System Security and press .The System Security screen is displayed.4. In the System Security screen, verify that Password Status is Unlocked.5. Select System Password, alter or delete the existing system password and press or .6. Select Setup Password, alter or delete the existing setup password and press or .NOTE: If you change the System and/or Setup password a message prompts you to re-enter the new password. Ifyou delete the System and/or Setup password, a message prompts you to confirm the deletion.7. Press to save the changes.20
