Figure 9. Removing and Installing a Mezzanine Blank1. tabs under the mezzanine blank (4)2. mezzanine blank3. locking tab on the side of the mezzanine blank4. mezzanine card slot5. mezzanine card retention latchInstalling A Mezzanine CardCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Rotate the mezzanine card retention latch to unlock the mezzanine blank.2. Release the locking tab on the side of the mezzanine blank secured to the wall of the chassis and lift the mezzanineblank away from the system.NOTE: Hold the mezzanine card by its edges only.3. Orient the card to align the connector on the bottom of the mezzanine card with the mezzanine card slot on theblade system board.4. Lower the card into place until it is fully seated.5. Rotate the mezzanine card retention latch over the mezzanine card to secure it in position.6. Install the blade in the sleeve.30Downloaded from www.Manualslib.com manuals search engine
