LOM Riser CardRemoving The LOM Riser CardCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Remove the blade from the sleeve.2. Remove the two screws that secure the LOM riser card to the blade system board.3. Lift the card away from the blade system board.Figure 10. Removing and Installing the LOM Riser Card1. LOM riser card2. screws (2)3. LOM riser card connectorInstalling The LOM Riser CardCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Remove the blade from the sleeve.2. Install the LOM riser card:a) Lower the LOM riser card into place until the card connector fits into the corresponding connector on the bladesystem board.b) Secure the card with the two screws.31Downloaded from www.Manualslib.com manuals search engine
