Dell PowerEdge M420 User Manual
Also see for PowerEdge M420: ManualCommand reference guideOwner's manualAdministrator's guideInformation update
                          | |
Contents
| 
Dell 10Gb Ethernet Pass Through II Rev 1.0071.5 10GbE PTM Status LightsThe 10GbE PTM Status lights indicate whether the switch is receiving power from the chassis, and the stateof the 10GbE PTM.Figure 3: Indicator LEDsTable 4 - 10GbE PTM states and LED configurations:Link up on off Both the internal and external links are upData activity on blink Link is up and data packets are sent or receivedLink protocol mismatch off on Refer to Section 1.3, “Link Protocol MismatchCondition,” on page 5 for details.LED10GbE PTM StatusIndication Green StatusOFF OFF OFFON OFF Boot in Progress10GbE PTM not readyBlinking BlueON BLINKING BLUE The CMC is identifyingthe newly installed 10GbE PTMON ON BLUE 10GbE PTM is on and operating Nor-mallyON ON or BLINKINGAMBERFault in SystemSelf-diagnosedOFF ON or BLINKINGAMBERFault in SystemCMC-detectedTable 3 - LED BehaviorCondition Green LED Amber LED DescriptionThe I/O Module is on andready when both the blueand green LEDs are lit.This LED can be blue oramber. A fault is indicatedwhen the amber LED isblinking. See Table 4. |
Related manuals for Dell PowerEdge M420
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine