Dell PowerEdge M620 Owner's Manual

Also see for PowerEdge M620: Command reference guide Glossary Owner's manual Administrator's guide Hardware reference manual

Contents

Dell PowerEdge M620 Owner's Manual Manual pdf 16 page image

Menu Item DescriptionCAUTION: Switching the boot mode may prevent the system from booting if the operatingsystem is not installed in the same boot mode.If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOSallows compatibility with non-UEFI operating systems. By default, the Boot Mode option is setto BIOS.NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field toBIOS disables the UEFI Boot Settings menu.Boot Sequence Retry Allows you to enable or disable the boot sequence retry feature. If this field is enabled and thesystem fails to boot, the system reattempts the boot sequence after 30 seconds. By default, theBoot Sequence Retry option is set to Disabled.BIOS Boot Settings Allows you to enable or disable BIOS Boot options.NOTE: This option is enabled only if the boot mode is BIOS.UEFI Boot Settings Allows you to enable or disable UEFI Boot options. The Boot options include IPv4 PXE and IPv6PXE. By default, the UEFI PXE boot protocol is set to IPv4.NOTE: This option is enabled only if the boot mode is UEFI.One-Time Boot Allows you to enable or disable a one-time boot from a selected device.Integrated Devices ScreenMenu Item DescriptionIntegrated RAIDControllerAllows you to enable or disable the integrated RAID controller. By default, the Integrated RAIDController option is set to Enabled.User Accessible USBPortsAllows you enable or disable the user accessible USB ports. Selecting Only Back Ports Ondisables the front USB ports and selecting All Ports Off disables both front and back USB ports.By default, the User Accessible USB Ports option is set to All Ports On.Internal USB Port Allows you to enable or disable the internal USB port. By default, the Internal USB Port optionis set to On.Internal SD Card Port Enables or disables the system’s internal SD card port. By default, Internal SD Card Port optionis set to On.NOTE: This option is displayed only if IDSDM is installed on the system board.Internal SD CardRedundancyIf set to Mirror mode, data is written on both SD cards. If any one of the SD card fails, data iswritten to the active SD card. Data from this card is copied to the replacement SD card at thenext boot. By default, Internal SD Card Redundancy option is set to Mirror.NOTE: This option is displayed only if IDSDM is installed on the system board.Integrated NetworkCard 1Allows you to enable or disable the integrated network card 1. By default, the IntegratedNetwork Card 1 option is set to Enabled.16