The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. Thediagnostics starts executing the tests on all the detected devices.Running Embedded System Diagnostics From An External Media1. Format the external resource media (USB flash drive or CDROM) to emulate a hard drive.See the documentation that came with the resource media for instructions.2. Configure the resource media to be a bootable device.3. Create a directory for the system diagnostics on the resource media.4. Copy the system diagnostics files into the directory.To download the Dell diagnostics utility, go to support.dell.com.5. Connect the resource media on your system.6. As the system boots, press .7. When prompted, select the media to perform a one-time boot.If diagnostics does not start automatically after the diagnostic media is booted, enter psa at the command prompt.System Diagnostic ControlsMenu DescriptionConfiguration Displays the configuration and status information of all detected devices.Results Displays the results of all tests that are executed.System Health Provides the current overview of the system performance.Event Log Displays a time-stamped log of the results of all tests run on the system. This is displayed if atleast one event description is recorded.For information about embedded system diagnostics, see theDell Enhanced Pre-boot System Assessment User Guide atdell.com/support/manuals.64
