Dell PowerEdge M620 Owner's Manual

Also see for PowerEdge M620: Command reference guide Glossary Owner's manual Administrator's guide Hardware reference manual

Contents

Dell PowerEdge M620 Owner's Manual Manual pdf 67 page image

Item Connector Description15 STORAGE PCIe extender card/storage controller card connector16 USB2 USB connector17 USB1 USB connectorDisabling A Forgotten PasswordThe blade's software security features include a system password and a setup password. The password jumper enablesthese password features or disables them, and clears any password(s) currently in use.CAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Remove the blade from the enclosure.2. Open the blade.3. Remove the system board to gain access to the jumpers.4. Relocate the jumper plug to disable the password feature.5. Reinstall the system board.6. Close the blade.7. Install the blade in the enclosure.When the blade is on, the power-on indicator is solid green. Allow the blade to finish booting.The existing passwords are not disabled (erased) until the system boots with the password removed. However,before you assign a new system and/or setup password, you must reinstall the password jumper.NOTE: If you assign a new system and/or setup password with the jumper removed, the system disables thenew password(s) the next time it boots.8. Remove the blade from the enclosure.9. Open the blade.10. Remove the system board to gain access to the jumpers.11. Relocate the jumper plug to enable the password feature.12. Reinstall the system board.13. Close the blade.14. Install the blade in the enclosure.15. Assign a new system and/or setup password.67