Figure 26. Removing and Installing a Processor1. processor shield retention screw 2. processor3. ZIF socket 4. processor5. notch 6. socket keys (2)7. socket release leverNOTE: After removing the processor, place it in an antistatic container for reuse, return, ortemporary storage. Do not touch the bottom of the processor. Touch only the side edges ofthe processor.Installing The ProcessorCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Before upgrading your system, download the latest system BIOS version from dell.com/support andfollow the instructions included in the compressed download file to install the update on yoursystem.NOTE: You can update the system BIOS using the Lifecycle Controller.2. Turn off the system, including any attached peripherals, and disconnect the system from theelectrical outlet. When disconnected from the power source, press and hold the power button forthree seconds to fully drain the system of stored power prior to removing the cover.3. Open the system.4. Remove the cooling shroud.58
