2. Follow the procedure listed in the Before working inside your system section.3. If required, remove the cooling shroud.Steps1. Disconnect the power cable from the power connector on the system board by pressing the sides of the power cable.2. Lift the fan out of the cooling fan bracket.Figure 50. Removing a cooling fan1. cooling fan 2. power cable connector3. cooling fan bracketNext steps1. Install the cooling fan.2. Follow the procedure listed in the After working inside your system section.Related linksRemoving the cooling shroudInstalling a cooling fanInstalling a cooling fanPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting andsimple repairs as authorized in your product documentation, or as directed by the online or telephone service and supportteam. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safetyinstructions that are shipped with your product.NOTE: The procedure for installing each fan is identical.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.3. If installed, remove the cooling fan blank.4. If required, remove the cooling shroud.88
