Item Indicator, Button, orConnector Icon DescriptionPress the system identification button to turn thesystem ID on or off.If the system stops responding during POST, pressand hold the system ID button for more than fiveseconds to enter BIOS progress mode.To reset iDRAC (if not disabled in F2 iDRAC setup),press and hold the button for more than 15seconds.4 USB management port/iDRAC managed USBportFunctions as a regular USB port or provide accessto the iDRAC Direct features. For moreinformation, see the iDRAC User’s Guide atDell.com/idracmanuals.5 USB connector Enables you to connect USB devices to thesystem. The port is USB 2.0-compliant.6 Optical drive slot Enables you to install an optional slim SATA DVD-ROM drive or DVD+/-RW drive.7 LCD menu buttons Enable you to navigate the control panel LCDmenu.8 Information tag Contains system information such as service tag,NIC, MAC address for your reference. Theinformation tag is a slide-out label panel.9 LCD panel Displays system ID, status information, and systemerror messages. See LCD panel features.10 Video connector Enables you to connect a VGA display to thesystem.11 Hard drive slots Enables you to install up to eight 2.5-inch hotswappable hard drives.Figure 3. Front panel features and indicators — four 3.5-inch cabled hard drive chassis12
