Option DescriptionNOTE: Every time the system boots, the BIOS syncs the serial MUX settingsaved in iDRAC. The serial MUX setting can independently be changed iniDRAC. Loading the BIOS default settings from within the BIOS setup utilitymay not always revert the serial MUX setting to the default setting of SerialDevice 1.External SerialConnectorEnables you to associate the External Serial Connector to Serial Device 1, SerialDevice 2, or the Remote Access Device by using this field.NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To useconsole redirection by SOL, configure the same port address for consoleredirection and the serial device.NOTE: Every time the system boots, the BIOS syncs the serial MUX settingsaved in iDRAC. The serial MUX setting can independently be changed iniDRAC. Loading the BIOS default settings from within the BIOS setup utilitymay not always revert this setting to the default setting of Serial Device 1.Failsafe Baud Rate Displays the failsafe baud rate for console redirection. The BIOS attempts todetermine the baud rate automatically. This failsafe baud rate is used only if theattempt fails, and the value must not be changed. This option is set to 115200 bydefault.Remote TerminalTypeSets the remote console terminal type. This option is set to VT 100/VT 220 bydefault.Redirection AfterBootEnables or disables the BIOS console redirection when the operating system isloaded. This option is set to Enabled by default.System Profile Settings screen detailsYou can use the System Profile Settings screen to enable specific system performance settings such aspower management.To view the System Profile Settings screen, click System Setup Main Menu → System BIOS → SystemProfile Settings.The System Profile Settings screen details are explained as follows:Option DescriptionSystem Profile Sets the system profile. If you set the System Profile option to a mode other thanCustom, the BIOS automatically sets the rest of the options. You can only changethe rest of the options if the mode is set to Custom. This option is set toPerformance Per Watt (OS).NOTE: All the parameters on the system profile setting screen available onlywhen the System Profile option is set to Custom.CPU PowerManagementSets the CPU power management. This option is set to OS DBPM by default. DBPMis Demand-Based Power Management.MemoryFrequencySets the speed of the system memory. You can select Maximum Performance,Maximum Reliability, or a specific speed.Turbo Boost Enables or disables the processor to operate in turbo boost mode. This option isset to Enabled by default.35
