Installing an expansion cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.3. Remove the expansion card riser.Steps1. Locate the expansion card connector on the riser.2. Holding the expansion card by its edges, position the card so that the card connector aligns with theconnector on the expansion card riser.3. Align the expansion card bracket with the hooks on the chassis.4. Insert the card connector into the expansion card riser connector until the card is firmly seated.NOTE: Ensure that the expansion card is properly seated along the chassis, so that expansioncard latch can be closed.5. If required, connect the cables to the expansion card.Figure 53. Installing an expansion card into the expansion card riser1. expansion card riser 2. expansion card riser connector3. expansion card latch 4. expansion cardNext steps1. Install the expansion card riser.2. Follow the procedure listed in the After working inside your system section.128
