5. iDRAC port card 6. iDRAC port card connectorNext steps1. Install the expansion card riser.2. Install the cooling shroud.3. If disconnected, reconnect the network cable.4. Follow the procedure listed in the After working inside your system section.Related LinksSafety instructionsBefore working inside your systemRemoving the cooling shroudRemoving the expansion card riserInstalling the expansion card riserInstalling the cooling shroudAfter working inside your systemSD vFlash card (optional)An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC portcard. It provides persistent on-demand local storage and a custom deployment environment that enablesautomation of server configuration, scripts, and imaging. It emulates USB device(s). For more information,see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.Removing the optional SD vFlash cardPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Locate the SD vFlash card slot at the back of the chassis.StepsTo remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlashcard from the SD vFlash card slot.132
