System BIOSYou can use the System BIOS screen to edit specific functions such as boot order, system password,setup password, set the RAID mode, and enable or disable USB ports.Related LinksSystem BIOS Settings detailsBoot SettingsNetwork SettingsSystem InformationMemory SettingsProcessor SettingsSATA SettingsIntegrated DevicesSerial CommunicationSystem Profile SettingsMiscellaneous SettingsiDRAC Settings utilityDevice SettingsViewing System BIOSViewing System BIOSTo view the System BIOS screen, perform the following steps:1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finishbooting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.Related LinksSystem BIOSSystem BIOS Settings detailsSystem BIOS Settings detailsThe System BIOS Settings screen details are explained as follows:Option DescriptionSystemInformationSpecifies information about the system such as the system model name, BIOSversion, and Service Tag.Memory Settings Specifies information and options related to the installed memory.Processor Settings Specifies information and options related to the processor such as speed andcache size.SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.Boot Settings Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modifyUEFI and BIOS boot settings.49