• When the system needs attention, the LCD turns amber, and displays an error code followed by descriptive text.NOTE: If the system is connected to a power source and an error is detected, the LCD turns amber regardless of whether thesystem is turned on or off.• The LCD backlight is turned off when the system is in standby mode and can be turned on by pressing either the Select, Left, or Rightbutton on the LCD panel.• The LCD backlight remains off if LCD messaging is turned off using the iDRAC utility, the LCD panel, or other tools.Figure 3. LCD panel featuresTable 2. LCD panel featuresItem Button Description1 Left Moves the cursor back in one-step increments.2 Select Selects the menu item highlighted by the cursor.3 Right Moves the cursor forward in one-step increments.During message scrolling:• Press and hold the button to increase scrolling speed.• Release the button to stop.NOTE: The display stops scrolling when the button is released. After 45seconds of inactivity the display starts scrolling.Related linksViewing Home screenSetup menuView menuViewing Home screenThe Home screen displays user-configurable information about the system. This screen is displayed during normal system operation whenthere are no status messages or errors. When the system is in standby mode, the LCD backlight turns off after a few minutes of inactivity,if there are no error messages.1 To view the Home screen, press one of the three navigation buttons (Select, Left, or Right).2 To navigate to the Home screen from another menu, complete the following steps:a Press and hold the navigation button till the up arrow is displayed.b Navigate to the using the up arrowc Select the Home icon.d On the Home screen, press the Select button to enter the main menu.Related linksLCD panelSetup menuView menuAbout the PowerEdge R930 11
