Figure 8. iDRAC Direct LED indicator1 iDRAC Direct status indicatorThe iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port (USBXML Import).Table 7. iDRAC Direct LED indicatorsConvention iDRAC Direct LEDindicator pattern ConditionA Green Turns green for a minimum of two seconds to indicate the start and end of a file transfer.B Flashing green Indicates file transfer or any operation tasks.C Green and turns off Indicates that the file transfer is complete.D Not lit Indicates that the USB is ready to be removed or that a task is complete.The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):Table 8. iDRAC Direct LED indicator patternsiDRAC Direct LEDindicator pattern ConditionSolid green for two seconds Indicates that the laptop is connected.Flashing green (on for twoseconds and off for twoseconds)Indicates that the laptop connected is recognized.Turns off Indicates that the laptop is unplugged.Indicator codes for redundant power supply unitEach AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is present or whether a power faulthas occurred.18 About the PowerEdge R930
