Option DescriptionOption DescriptionDrive Type Displays the type of drive attached to the SATA port.Capacity Displays the total capacity of the hard drive. This field isundefined for removable media devices such as opticaldrives.Port F For AHCI or RAID mode, BIOS support is always enabled.Option DescriptionModel Displays the drive model of the selected device.Drive Type Displays the type of drive attached to the SATA port.Capacity Displays the total capacity of the hard drive. This field isundefined for removable media devices such as opticaldrives.Boot Settings screen detailsYou can use the Boot Settings screen to set the boot mode to either BIOS or UEFI. It also enables you tospecify the boot order.To view the Boot Settings screen, click System Setup Main Menu → System BIOS → Boot Settings.The Boot Settings screen details are explained as follows:Option DescriptionBoot Mode Enables you to set the boot mode of the system. Setting this field to UEFI disablesthe BIOS Boot Settings menu. Setting this field to BIOS disables the UEFI BootSettings menu.CAUTION: Switching the boot mode may prevent the system from booting ifthe operating system is not installed in the same boot mode.If the operating system supports UEFI, you can set this option to UEFI. Setting thisfield to BIOS allows compatibility with non-UEFI operating systems. This option isset to BIOS by default.Boot SequenceRetryEnables or disables the Boot Sequence Retry feature. If this field is enabled and thesystem fails to boot, the system reattempts the boot sequence after 30 seconds.This option is set to Enabled by default.Hard-Disk Failover Specifies the hard drive that is booted in the event of a hard drive failure. Thedevices are selected in the Hard-Disk Drive Sequence on the Boot Option Settingmenu. When this option is set to Disabled, only the first hard drive in the list isattempted to boot. When this option is set to Enabled, all hard drives are attemptedto boot in the order selected in the Hard-Disk Drive Sequence. This option is notenabled for UEFI Boot Mode.Boot OptionSettingsConfigures the boot sequence and the boot devices.26
