3. Install a replacement SD vFlash card by inserting the contact-pin end of the SD vFlash card into theSD vFlash card slot on the iDRAC port card module.NOTE: The slot is keyed to ensure correct insertion of the SD vFlash card.4. Press the SD vFlash card inward to lock it into the SD vFlash card slot.Removing the optional iDRAC port cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you follow the Safety instructions.2. Follow the procedure listed in Before working inside your system.3. Keep the Phillips #2 screwdriver ready.4. If connected, disconnect the network cable from the iDRAC port card.Steps1. Loosen the screw securing the iDRAC port card holder to the system board.2. Pull the iDRAC port card to disengage it from the iDRAC port card connector on the system board,and remove the card from the chassis.75