80 Using the System Setup Program and UEFI Boot ManagerIf you do not enter the correct password in three attempts, the system lets youview, but not modify, the System Setup screens. The following options areexceptions: If System Password is not Enabled and is not locked through thePassword Status option, you can assign a system password. You cannot disableor change an existing system password.NOTE: You can use the Password Status option in conjunction with the SetupPassword option to protect the system password from unauthorized changes.Deleting or Changing an Existing Setup Password1 Enter the System Setup program and select the System Security.2 Highlight Setup Password, press to access the setup passwordwindow. Press twice to clear the existing setup password.The setting changes to Not Enabled.3 If you want to assign a new setup password, perform the steps in "Assigninga Setup Password."Embedded System ManagementThe Unified Server Configurator (USC) is an embedded utility that enablessystems and storage management tasks from an embedded environmentthroughout the server’s lifecycle.The USC can be started during the boot sequence and can functionindependently of the operating system.NOTE: Certain platform configurations may not support the full set of featuresprovided by USC.The following features of USC are supported on systems with BaseboardManagement Controller (BMC):• Installing an operating system• Running diagnostics to validate the memory, I/O devices, processors,physical disks, and other peripheralsWhen an optional iDRAC6 Express card is installed, USC provides thefollowing additional features:• Downloading and applying firmware updates• Configuring hardware and firmware
