Dell PowerEdge VRTX Owner's Manual

Also see for PowerEdge M620: Command reference guide Glossary Owner's manual Administrator's guide Hardware reference manual

Contents

Dell PowerEdge VRTX Owner's Manual Manual pdf 17 page image

Menu Item DescriptionNOTE: This option is displayed only if IDSDM is installed on the system board.Integrated NetworkCard 1Allows you to enable or disable the integrated network card 1. By default, the IntegratedNetwork Card 1 option is set to Enabled.OS Watchdog Timer Allows you to enable or disable the OS watchdog timer. When this field is enabled, theoperating system initializes the timer and the OS watchdog timer helps in recovering theoperating system. By default, the OS Watchdog Timer option is set to Disabled.Embedded VideoControllerAllows you to enable or disable the Embedded Video Controller. By default, the embeddedvideo controller is Enabled.SR-IOV Global Enable Allows you to enable or disable the BIOS configuration of Single Root I/O Virtualization (SR-IOV) devices. By default, the SR-IOV Global Enable option is set to Disabled.Mezzanine SlotDisablementAllows you to enable or disable available PCIe mezzanine card slots on your system. The SlotDisablement feature controls the configuration of PCIe mezzanine cards installed in thespecified slot.CAUTION: Slot disablement must be used only when the installed peripheral card ispreventing booting into the Operating System or causing delays in system startup. If theslot is disabled, both the Option ROM and UEFI driver are disabled.NOTE: Use this option only for troubleshooting purposes. If one or more of the PCIemezzanine card slots are disabled, an error message is displayed during system startup.For proper operation, make sure that the server module has two Dell PCIe mezzaninecards installed and both cards are set to Enabled.NOTE: The Boot Driver Disabled option does not apply to the M620 when operating in thePowerEdge VRTX chassis. Selecting this option will have the same result as selectingEnabled.Serial Communications ScreenMenu Item DescriptionSerial Communication Allows you to enable the COM port or Console Redirection options.Serial Port Address Allows you to set the port address for serial devices. By default, the Serial Port Address optionis set to COM1.NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use consoleredirection by SOL, configure the same port address for console redirection and the serialdevice.Failsafe Baud Rate Displays the failsafe baud rate for console redirection. The BIOS attempts to determine thebaud rate automatically. This failsafe baud rate is used only if the attempt fails and the valuemust not be changed. By default, the Failsafe Baud Rate option is set to 11520.Remote TerminalTypeAllows you to set the remote console terminal type. By default, the Remote Terminal Typeoption is set to VT 100/VT220.17