1. release button2. PCIe label on server moduleNOTE: This label indicates that theserver module is configured specificallyfor the VRTX enclosure.3. guide rail on server module (or server moduleblank)4. guide rail on enclosure5. server module handleInstalling A Server Module1. If you are installing a new server module, remove the plastic cover from the I/O connector(s) and save for futureuse.2. Orient the server module so that the module handle is on the left side of the server module.3. Slide the server module into the enclosure until the module release handle engages and locks the server module inplace.4. Reinstall the front bezel.Opening And Closing The Server ModuleOpening The Server ModuleCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.NOTE: It is recommended that you always use a static mat and static strap while working on components in theinterior of the system.1. Remove the server module from the enclosure.2. Install the I/O connector cover.3. Press the release button and slide the cover toward the back of the server module.4. Carefully lift the cover away from the server module.27
