Dell PowerVault NX1950 Deployment Manual

Also see for PowerVault NX1950: Important information Getting started Installation guide Deployment guide Installation and troubleshooting guide

Contents

28 Deployment GuideAfter you have installed all the software components, reboot the system.The Dell Storage Initialization Wizard walks through the detection andany required configuration of the Dell|EMC storage arrays. Upon exit, thePowerVault NX1950 Initial Configuration Tasks Wizard appears andcompletes the setup of the PowerVault NX1950 storage systems. For moreinformation, see the installation guide that ships with your system.After all the software components are installed, reboot your system. TheDell Storage Initialization Wizard walks through the detection and anyrequired configuration of the storage arrays. Upon exit, the PowerVaultNX1950 Initial Configuration Tasks Wizard appears and completes thesetup of the PowerVault NX1950 storage systems. For more information,see the installation guide that ships with your system.NOTE: If you have purchased the PowerVault MD3000 Premium Feature Keys,see the PowerVault MD3000 Premium Feature Activation Card for installationinstructions and to activate the functionality.Installing Additional ComponentsTo install any additional components, perform the following steps:NOTE: Only supported options for your operating system version are available.1 Log on as Administrator.2 Click Start→ Control Panel, and then double-click Add or RemovePrograms.Table 1-3. PowerVault NX 1950 with PowerVault MD3000 IntegratedComponent Location DetailsStorPort Hotfixes support.microsoft.comModular Disk StorageManagerDell PowerVault MD3000Resource CDRefer to the CD thatships with yourPowerVault MD3000storage array.PowerVault MD3000 VDSand VSS providerDell PowerVault MD3000Resource CDRefer to the CD thatships with yourPowerVault MD3000storage array.