Deployment Guide 293 Click Add/Remove Windows Components.The Windows Components Wizard window appears.4 Select the components that you want to install.5 Follow the instructions on your screen to complete the installation.Installing and Configuring the MUIThe MUI is pre-installed from Dell and the languages that are part of theinitial configuration are selected. The MUI is automatically installed aspart of the restore process using the Dell OpenManage Server Assistant,but the language is not selected. To select the MUI language, launch theInitial Configuration Tasks wizard, select Regional Settings, and thenselect Language, or see "Applying the MUI Language."NOTE: If you change the regional settings (including changing the language),you must log off and log on. At logon, the windows panes and consoles changeto the language selected. A reboot is not required.Installation steps are not required as is already installed MUI on yoursystem. If you want to reinstall or restore MUI, perform the followingsteps:1 Insert the Windows Unified Data Storage Server 2003 R2 x64 DVD intothe DVD drive of the PowerVault NX1950 storage system and navigateto \cmpnents\mui\muisetup.exe.NOTE: There are separate MUI installers that you need to execute foreach language. To ensure that all the MUI components have beeninstalled, see the readme file associated with the MUI pack.2 In the Installer window, select the languages to be installed, and selectthe default MUI language from the menu.3 Click OK to perform the installation.4 Reboot your system at the end of the installation.5 After rebooting the system, open the readme file that contains detailsabout the language files and associations.6 Run the second MUI installer for the required language.