Dell Precision 390 User Manual

Also see for OptiPlex 390: Setup & features Quick reference guide Specifications Specifications Setup & features

Contents

No sound from speakersNo sound from headphonesNOTE: The volume control in some MP3 players overrides the Windows volume setting. If you have been listening to MP3 songs, ensure that you did notturn the player volume down or off.Check the speaker cable connections — Ensure that the speakers are connected as shown on the setup diagram supplied with thespeakers. If you purchased a sound card, ensure that the speakers are connected to the card.Ensure that the subwoofer and the speakers are turned on — See the setup diagram supplied with the speakers. If your speakers havevolume controls, adjust the volume, bass, or treble to eliminate distortion.Adjust the Windows volume control — Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that thevolume is turned up and that the sound is not muted.Disconnect headphones from the headphone connector — Sound from the speakers is automatically disabled when headphones areconnected to the computer's front-panel headphone connector.Test the electrical outlet — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.Enable digital mode — Your speakers do not work if the CD drive is operating in analog mode.1. Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.2. Click Sounds and Audio Devices.3. Click the Hardware tab.4. Double-click the name of your CD drive.5. Click the Properties tab6. Check the Enable digital CD audio for this CD-ROM device box.Eliminate possible interference — Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.Run the speaker diagnosticsReinstall the audio driver —See Reinstalling Drivers and Utilities.Check the device option setting — Enter system setup (see Entering System Setup) and ensure that Sound under the Integrated Devicesoption is set to On. Exit system setup and restart your computer.Run the Dell Diagnostics (see Dell Diagnostics)Check for Software and Hardware ConflictsCheck the headphone cable connection — Ensure that the headphone cable is securely inserted into the headphone connector. SeeInformation About Your Computer.Disable digital mode — Your headphones do not work if the CD drive is operating in digital mode.1. Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.2. Click Sounds and Audio Devices.3. Click the Hardware tab.4. Double-click the name of your CD drive.5. Click the Properties tab.6. Uncheck the Enable digital CD audio for this CD-ROM device box.