System Setup OptionsNOTE: Depending on your computer and installed devices, the items listed in this section may not be present or may not appear exactly as listed.SystemProcessorInfoDisplays the following information for the processor installed inthe system: Processor Type, Processor Clock Speed,Processor Bus Speed, Processor Cache Size, Processor IDnumber, whether the processor is Hyperthreading or Multi-core Capable, and if the processor supports 64-bitTechnology.Memory InfoDisplays the amount of Installed Memory, Memory Speed,Memory Channel Mode, and a description of the MemoryTechnology. This option also displays a table that describesthe memory size, whether the memory module is ECC capable,single or dual rank, type, and organization.PCI Info Displays the contents of each PCI, PCI Express, and PCI-X slot.Date/Time Controls the system's internal calendar and clock.BootSequence(Diskettedrivedefault)Determines the order in which the system searches for bootdevices during system startup.NOTE: If you insert a boot device and restart the computer,this option appears in the system setup menu. To boot from aUSB memory device, select the USB device and move it so itbecomes the first device in the list.DrivesDiskette Drive(Internal default)Enables and disables the floppy drives and setsread permission for the internal floppy drive. Offdisables all floppy drives. USB disables theinternal diskette drive and enables a USB floppydrive, if the USB controller is enabled and a USBdrive is connected. Internal enables the internalfloppy drive. Read Only enables the internal drivecontroller and allows the internal floppy driveread-only permission.NOTE: Operating systems with USB support willrecognize USB floppy drives regardless of thissetting.Drives 0 through 4Enables or disables a SATA drive. On enables theinterface so that the device can be used.Displays the Controller type (SATA), Port numberthe drive is using, Drive ID number, and Capacity.