Using Your Projector 55WIRELESS / NETWORKThe Wireless / Network menu allows you to configure the network connectionsettings.DHCP ADDRESS—If a DHCP server exists in the network to which the projector isconnected, the IP address will automatically be acquired when you select DHCPOn. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Useto select the number of IP Address, Subnet Mask, and Gateway. Key inEnter to confirm each number and then use to set the next item.IP A DDRESS—Automatically or manually assigns the IP address to the projectorconnected to the network.S UBNET MASK—Configure the Subnet Mask of the network connection.G ATEWAY—Check the Gateway address with your network/system administrator ifyou configure it manually.DNS—Check the DNS Server IP address with your network/system administratorif you configure it manually.S TORE —Press to save the changes made in network configuration settings.NOTE:1 Use and button to select IP Address, Subnet Mask, Gateway, DNS andStore.2 Press the button to enter IP Address, Subnet Mask, Gateway or DNS to setthe value. (The selected option is highlighted in yellow)a Use and button to select the option.b Use and button to set the value.c After the setup is complete, press the button to exit.
