Dell S6000–ON Troubleshooting Manual

Also see for S6000-ON: Getting started manual Configuration guide Installation guide

Contents

Example of the pcitool Configuation File Output# more default_pci_list.cfgBus:Dev.Fn=00:00.0 ID=0c738086 NOT LISTED0c738086 00000007 06000002 00000000 00000000 00000000 00000000 0000000000000000 00000000 00000000 00008086 00000000 00000000 00000000 0000000000000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000000000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000000000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000000000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000000000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000000000000 00000000 00000000 00000000 01080000 00000000 00020fb1 00000000Bus:Dev.Fn=00:01.0 ID=0c468086 PCIe port0c468086 00100147 06040002 00010010 ff760004 00000000 00010100 000000f0…i2ctoolThe i2ctool allows testing of the devices on the i2c bus.In EDA Quick Test mode, i2ctool scans busses and identifies all of the devices. If a device is behind a MUX, i2ctool looks for devicesthrough the MUX and, if present, a second-level MUX as well.Example of the i2ctool OuputSyntax: ./i2ctool -h := show this helptest := test the pre-programmed configuration# ./i2ctool test userI2cFile.cfgread := read I2C device with

# ./i2ctool read /dev/i2c-0 0x50 0x00 10write := write I2C device with

... # ./i2ctool write /dev/i2c-0 0x50 0x00 0x0a 0x0b 0x0cscan := scan the I2C devices on the specified bus prefix# ./i2ctool scan /dev/i2c-Example of the i2ctool Configuration File Output# more gpio_00_i2c_devices.cfgI2C devices found on bus #0: 10Dev found @ 0x18,/dev/i2c-0,-,-,0x18,0x00,1Dev found @ 0x30,/dev/i2c-0,-,-,0x30,0x00,1Dev found @ 0x31,/dev/i2c-0,-,-,0x31,0x00,1Dev found @ 0x32,/dev/i2c-0,-,-,0x32,0x00,1Dev found @ 0x33,/dev/i2c-0,-,-,0x33,0x00,1Dev found @ 0x3e,/dev/i2c-0,-,-,0x3e,0x00,1Dev found @ 0x4d,/dev/i2c-0,-,-,0x4d,0x00,1Dev found @ 0x50,/dev/i2c-0,-,-,0x50,0x00,1Dev found @ 0x53,/dev/i2c-0,-,-,0x53,0x00,1Dev found @ 0x69,/dev/i2c-0,-,-,0x69,0x00,1I2C devices found on bus #1: 0I2C devices found on bus #2: 2Dev found @ 0x51,/dev/i2c-2,-,-,0x51,0x00,1Dev found @ 0x59,/dev/i2c-2,-,-,0x59,0x00,1memtoolThe memory tool (memtool) tests system memory.EDA Quick Test mode only completes simple access (read) tests. You can use memtool to test static memory areas, such as L2Cachemapped as SRAM or DRAM on a memory mapped device.14 ONIE diagnostics