Dell S6000–ON Troubleshooting Manual

Also see for S6000-ON: Getting started manual Configuration guide Installation guide

Contents

INSTALLER-DND-SK-1.0 22% |****** | 6050k 0:00:10 ETAINSTALLER-DND-SK-1.0 31% |********* | 8625k 0:00:08 ETAINSTALLER-DND-SK-1.0 40% |************ | 10986k 0:00:07 ETAINSTALLER-DND-SK-1.0 48% |************** | 13062k 0:00:06 ETAINSTALLER-DND-SK-1.0 56% |***************** | 15268k 0:00:05 ETAINSTALLER-DND-SK-1.0 66% |******************** | 18026k 0:00:04 ETAINSTALLER-DND-SK-1.0 75% |*********************** | 20535k 0:00:02 ETAINSTALLER-DND-SK-1.0 84% |************************** | 22803k 0:00:01 ETAINSTALLER-DND-SK-1.0 92% |**************************** | 25063k 0:00:00 ETAINSTALLER-DND-SK-1.0 100% |*******************************| 27115k 0:00:00 ETAINSTALLER-DND-SK-1.0 100% |*******************************| 27115k 0:00:00 ETAONIE: Executing installer: tftp://172.27.1.176/INSTALLER-DND-SK-x.x.x.x.binVerifying image checksum ... OK.Preparing image archive from /installer ... Done.Mounting /dev/sda3...Done.Copying Images ...Done.Installing Menu Entry ...DoneAll DoneONIE:/ # umount: can't remount rootfs read-onlyThe system is going down NOW!Sent SIGTERM to all processesSent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cacheRestarting system.machine restart5 After installing the diagnostic image, a new entry (DELL EMC DIAG) is added to the ONIE boot menu.6 Select the DELL EMC DIAG option to boot the Diagnostics image.NOTE: When you update ONIE, the DELL EMC DIAG option is removed. To recreate the DELL EMC DIAG option in themenu, you must install the Dell Diag Entry updater, as shown in the following example.ONIE:/ #ONIE:/ #ONIE:/ # onie-nos-install tftp://xx.xx.xxx.xx/DND-SK-DELL-DIAG-ENTRY-UPDATERStopping: discover... done.Info: Fetching tftp://xx.xx.xxx.xx/DND-SK-DELL-DIAG-ENTRY-UPDATER ...DND-SK-DELL-DIAG-ENT 100% |*******************************| 15371 0:00:00 ETAONIE: Executing installer: tftp://10.16.127.35/DND-SK-DELL-DIAG-ENTRY-UPDATERVerifying image checksum ... OK.Preparing image archive from /installer ... Done.Installing Menu Entry ...Done.ONIE:/ # umount: can't remount rootfs read-onlyThe system is going down NOW!Sent SIGTERM to all processesSent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cacheRestarting system.machine restartDell EMC diagnostic test suiteTo run the Dell EMC diagnostic test suite, use the following command.Use the following step after the system boots up.1 To run the Dell EMC diagnostic test suite, select the DELL EMC DIAG option.NOTE: Use the up and down arrow keys to select which entry is highlighted. Press Enter to select an operating software-selected OS or enter e to edit the commands before booting. Enter c for a command line. The highlighted entry (*)executes automatically in the operating system.22 Dell EMC diagnostics