Dell S6100 Installation Manual

Also see for S6100: Configuration guide Configuration guide Configuration guide Release notes

Contents

Dell S6100 Installation Manual Manual pdf 11 page image

LED Description• Flashing amber, ~30 ms—Port link is 4x10 GbETable 4. QSFP28 Port LEDs—2x40GbE ModeLED DescriptionLink LED • Off—No Link• Solid green—Port link is 2x40 GbEActivity LED • Off—No Link• Flashing amber, ~30 ms—Port link is 2x40 GbETable 5. SFP+ port LEDsLED DescriptionLink LED • Off—No Link• Solid green—Port activity operating at maximum port speed• Solid amber—Port activity operating at lower speedActivity LED • Off—No Link• Flashing green, ~30 ms—port activity operating at maximumport speed• Flashing amber, ~30 ms—port activity operating at lower portspeedPrerequisitesThe following is a list of components required for successful installation of the S6100-ON:NOTE: Detailed installation instructions for the S6100-ON are provided in Site preparations and S6100-ON Installation.• S6100–ON chassis or multiple chassis, if stacking• AC or DC country and regional-specific cables to connect the AC or DC power source to each of the chassis’ AC or DC power supplies• Mounting brackets for rack installation, included• Screws for rack installation• #1 and #2 Phillips screw drivers, not included• Torx screwdriver, not included• Ground cable screws, included• Copper or fiber cablesOther optional components are:• Ground cable• Extra power supply unit• Extra fan module• Extra mounting bracketsS6100–ON system 11