Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Dell S6100 manuals

S6100 first page preview

S6100

Brand: Dell | Category: Switch
Table of contents
S6100 first page preview

S6100

Brand: Dell | Category: Switch
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Table Of Contents
  16. Table Of Contents
  17. Table Of Contents
  18. Table Of Contents
  19. Table Of Contents
  20. Table Of Contents
  21. Table Of Contents
  22. Table Of Contents
  23. Table Of Contents
  24. Table Of Contents
  25. Table Of Contents
  26. Table Of Contents
  27. Table Of Contents
  28. Table Of Contents
  29. Table Of Contents
  30. About this Guide
  31. Configuration Fundamentals
  32. Navigating CLI Modes
  33. The do Command
  34. Obtaining Help
  35. Command History
  36. Multiple Users in Configuration Mode
  37. Getting Started
  38. Console Access
  39. Micro USB-B Access
  40. Default Configuration
  41. Configure a Management Route
  42. Configuration File Management
  43. Mounting an NFS File System
  44. Save the Running-Configuration
  45. Configure the Overload Bit for a Startup Scenario
  46. Managing the File System
  47. Upgrading Dell Networking OS
  48. Verify Software Images Before Installation
  49. Management
  50. Removing a Command from EXEC Mode
  51. Applying a Privilege Level to a Username
  52. Audit and Security Logs
  53. Configuring Logging Format
  54. Log Messages in the Internal Buffer
  55. Track Login Activity
  56. Display Login Statistics
  57. Limit Concurrent Login Sessions
  58. Enabling the System to Clear Existing Sessions
  59. Changing System Logging Settings
  60. Display the Logging Buffer and the Logging Configuration
  61. Synchronizing Log Messages
  62. Enabling Timestamp on Syslog Messages
  63. Configuring FTP Server Parameters
  64. Terminal Lines
  65. Configuring Login Authentication for Terminal Lines
  66. Setting Timeout for EXEC Privilege Mode
  67. Lock CONFIGURATION Mode
  68. Restoring the Factory Default Settings
  69. Reloading the system
  70. Port-Authentication Process
  71. EAP over RADIUS
  72. Important Points to Remember
  73. Configuring dot1x Profile
  74. Configuring MAC addresses for a do1x Profile
  75. Configuring Critical VLAN
  76. Configuring Request Identity Re-Transmissions
  77. Configuring a Quiet Period after a Failed Authentication
  78. Forcibly Authorizing or Unauthorizing a Port
  79. Re-Authenticating a Port
  80. Configuring Dynamic VLAN Assignment with Port Authentication
  81. Guest and Authentication-Fail VLANs
  82. Configuring Timeouts
  83. Multi-Host Authentication
  84. Multi-Supplicant Authentication
  85. MAC Authentication Bypass
  86. MAB in Single-host and Multi-Host Mode
  87. Dynamic CoS with 802.1X
  88. Access Control Lists (ACLs)
  89. IP Access Control Lists (ACLs)
  90. Implementing ACLs on Dell Networking OS
  91. Configuring Match Routes
  92. Configuring Set Conditions
  93. Configure a Route Map for Route Redistribution
  94. Configure a Route Map for Route Tagging
  95. IP Fragment Handling
  96. Configure a Standard IP ACL
  97. Configuring a Standard IP ACL Filter
  98. Configure an Extended IP ACL
  99. Configuring Filters Without a Sequence Number
  100. Configure Layer 2 and Layer 3 ACLs
  101. Applying an IP ACL
  102. Configure Ingress ACLs
  103. Applying Egress Layer 3 ACLs (Control-Plane)
  104. IP Prefix Lists
  105. ACL Resequencing
  106. Route Maps
  107. Implementation Information
  108. Enabling Flow-Based Monitoring
  109. Bidirectional Forwarding Detection (BFD)
  110. BFD Packet Format
  111. BFD Sessions
  112. BFD Three-Way Handshake
  113. Session State Changes
  114. Configure BFD for Physical Ports
  115. Configure BFD for Static Routes
  116. Configure BFD for OSPF
  117. Configure BFD for OSPFv3
  118. Configure BFD for IS-IS
  119. Configure BFD for BGP
  120. Configure BFD for VRRP
  121. Configuring Protocol Liveness
  122. Border Gateway Protocol IPv4 (BGPv4)
  123. Sessions and Peers
  124. Route Reflectors
  125. BGP Attributes
  126. Weight
  127. Multi-Exit Discriminators (MEDs)
  128. Origin
  129. Next Hop
  130. Implement BGP with Dell Networking OS
  131. Ignore Router-ID in Best-Path Calculation
  132. AS Number Migration
  133. BGP4 Management Information Base (MIB)
  134. Configuration Information
  135. Enabling BGP
  136. Configuring AS4 Number Representations
  137. Configuring Peer Groups
  138. Configuring BGP Fast Fall-Over
  139. Configuring Passive Peering
  140. Allowing an AS Number to Appear in its Own AS Path
  141. Enabling Graceful Restart
  142. Enabling Neighbor Graceful Restart
  143. Regular Expressions as Filters
  144. Redistributing Routes
  145. Enabling Additional Paths
  146. Configuring an IP Extended Community List
  147. Filtering Routes with Community Lists
  148. Manipulating the COMMUNITY Attribute
  149. Changing MED Attributes
  150. Configuring the local System or a Different System to be the Next Hop for BGP-Learned Routes
  151. Changing the WEIGHT Attribute
  152. Filtering BGP Routes Using Route Maps
  153. Configuring BGP Route Reflectors
  154. Aggregating Routes
  155. Enabling Route Flap Dampening
  156. Changing BGP Timers
  157. Route Map Continue
  158. Enabling MBGP Configurations
  159. BGP Regular Expression Optimization
  160. Storing Last and Bad PDUs
  161. Capturing PDUs
  162. PDU Counters
  163. Content Addressable Memory (CAM)
  164. Test CAM Usage
  165. View CAM Usage
  166. CAM Optimization
  167. Syslog Warning Upon 90 Percent Utilization of CAM
  168. Control Plane Policing (CoPP)
  169. Configure Control Plane Policing
  170. Configuring CoPP for Protocols
  171. Configuring CoPP for CPU Queues
  172. Displaying CoPP Configuration
  173. Data Center Bridging (DCB)
  174. Priority-Based Flow Control
  175. Enhanced Transmission Selection
  176. Data Center Bridging Exchange Protocol (DCBx)
  177. Data Center Bridging in a Traffic Flow
  178. DCB Maps and its Attributes
  179. Configuring Priority-Based Flow Control
  180. Configuring Lossless Queues
  181. Configuring PFC in a DCB Map
  182. PFC Prerequisites and Restrictions
  183. Configuring PFC without a DCB Map
  184. Buffer Sizes for Lossless or PFC Packets
  185. SNMP Support for PFC and Buffer Statistics Tracking
  186. Configuration Example for DSCP and PFC Priorities
  187. Using PFC to Manage Converged Ethernet Traffic
  188. ETS Operation with DCBx
  189. Configuring ETS in a DCB Map
  190. Hierarchical Scheduling in ETS Output Policies
  191. Applying DCB Policies in a Switch Stack
  192. DCB Configuration Exchange
  193. Propagation of DCB Information
  194. DCBx Prerequisites and Restrictions
  195. Verifying the DCB Configuration
  196. QoS dot1p Traffic Classification and Queue Assignment
  197. Sample DCB Configuration
  198. PFC and ETS Configuration Command Examples
  199. Dynamic Host Configuration Protocol (DHCP)
  200. Assign an IP Address using DHCP
  201. Configuring the Server for Automatic Address Allocation
  202. Specifying a Default Gateway
  203. Using NetBIOS WINS for Address Resolution
  204. Using DHCP Clear Commands
  205. ip address dhcp
  206. DHCP Client on a Management Interface
  207. Configure Secure DHCP
  208. Option 82
  209. enabling dhcp snooping
  210. Drop DHCP Packets on Snooped VLANs Only
  211. Dynamic ARP Inspection
  212. Configuring Dynamic ARP Inspection
  213. Source Address Validation
  214. DHCP MAC Source Address Validation
  215. Viewing the Number of SAV Dropped Packets
  216. Equal Cost Multi-Path (ECMP)
  217. Managing ECMP Group Paths
  218. Modifying the ECMP Group Threshold
  219. Support for ECMP in host table
  220. Flow-based Hashing for ECMP
  221. FIP Snooping
  222. FIP Snooping on Ethernet Bridges
  223. Using FIP Snooping
  224. Enabling the FCoE Transit Feature
  225. Enable FIP Snooping on VLANs
  226. Impact on Other Software Features
  227. Displaying FIP Snooping Information
  228. FCoE Transit Configuration Example
  229. Flex Hash and Optimized Boot-Up
  230. Configuring Fast Boot and LACP Fast Switchover
  231. Guidelines for Configuring Optimized Booting Mechanism
  232. Interoperation of Applications with Fast Boot and System States
  233. BGP Graceful Restart
  234. Changes to BGP Multipath
  235. Preserving 802.1Q VLAN Tag Value for Lite Subinterfaces
  236. Force10 Resilient Ring Protocol (FRRP)
  237. Ring Status
  238. Important FRRP Points
  239. Important FRRP Concepts
  240. Implementing FRRP
  241. Configuring and Adding the Member VLANs
  242. Setting the FRRP Timers
  243. Troubleshooting FRRP
  244. GARP VLAN Registration Protocol (GVRP)
  245. Configure GVRP
  246. Enabling GVRP Globally
  247. Configure a GARP Timer
  248. Internet Group Management Protocol (IGMP)
  249. leaving a multicast group
  250. IGMP Version 3
  251. Configure IGMP
  252. Viewing IGMP Enabled Interfaces
  253. Adjusting Timers
  254. Enabling IGMP Immediate-Leave
  255. Removing a Group-Port Association
  256. Configuring the Switch as Querier
  257. Egress Interface Selection (EIS) for HTTP and IGMP Applications
  258. Enabling and Disabling Management Egress Interface Selection
  259. Handling of Management Route Configuration
  260. Handling of Switch-Destined Traffic
  261. Handling of Transit Traffic (Traffic Separation)
  262. Behavior of Various Applications for Switch-Initiated Traffic
  263. Behavior of Various Applications for Switch-Destined Traffic
  264. Interworking of EIS With Various Applications
  265. Interfaces
  266. Interface Types
  267. Resetting an Interface to its Factory Default State
  268. Enabling a Physical Interface
  269. Overview of Layer Modes
  270. Configuring Layer 2 (Interface) Mode
  271. Egress Interface Selection (EIS)
  272. Management Interfaces
  273. Configuring a Management Interface on an Ethernet Port
  274. VLAN Interfaces
  275. Loopback Interfaces
  276. Port Channel Definition and Standards
  277. Interfaces in Port Channels
  278. Adding a Physical Interface to a Port Channel
  279. Reassigning an Interface to a New Port Channel
  280. Configuring the Minimum Oper Up Links in a Port Channel
  281. Assigning an IP Address to a Port Channel
  282. Deleting or Disabling a Port Channel
  283. Changing the Hash Algorithm
  284. Bulk Configuration
  285. Defining Interface Range Macros
  286. Monitoring and Maintaining Interfaces
  287. Split 40G Ports on a 16X40G QSFP+ Module
  288. Splitting 100G Ports
  289. Link Dampening
  290. Link Bundle Monitoring
  291. Enabling Pause Frames
  292. Port-Pipes
  293. FEC Configuration
  294. Setting the Speed of Ethernet Interfaces
  295. Adjusting the Keepalive Timer
  296. Configuring the Interface Sampling Size
  297. Dynamic Counters
  298. Enhanced Validation of Interface Ranges
  299. IPv4 Routing
  300. IP Addresses
  301. Configuring Static Routes
  302. Configure Static Routes for the Management Interface
  303. Using the Configured Source IP Address in ICMP Messages
  304. Enabling Directed Broadcast
  305. Specifying the Local System Domain and a List of Domains
  306. Configuration Tasks for ARP
  307. Enabling Proxy ARP
  308. Enabling ARP Learning via Gratuitous ARP
  309. Configuring ARP Retries
  310. UDP Helper
  311. Configurations Using UDP Helper
  312. UDP Helper with Subnet Broadcast Addresses
  313. UDP Helper with No Configured Broadcast Addresses
  314. IPv6 Routing
  315. Extended Address Space
  316. Longest Prefix Match (LPM) Table and IPv6 /65 – /128 support
  317. IPv6 Header Fields
  318. Extension Header Fields
  319. Addressing
  320. Implementing IPv6 with Dell Networking OS
  321. IPv6 Neighbor Discovery
  322. Debugging IPv6 RDNSS Information Sent to the Host
  323. Displaying IPv6 RDNSS Information
  324. Configuration Tasks for IPv6
  325. Assigning an IPv6 Address to an Interface
  326. Configuring Telnet with IPv6
  327. Displaying an IPv6 Interface Information
  328. Showing IPv6 Routes
  329. Showing the Running-Configuration for an Interface
  330. Configuring IPv6 RA Guard
  331. Configuring IPv6 RA Guard on an Interface
  332. Monitoring IPv6 RA Guard
  333. iSCSI Optimization
  334. Monitoring iSCSI Traffic Flows
  335. Detection and Auto-Configuration for Dell EqualLogic Arrays
  336. Synchronizing iSCSI Sessions Learned on VLT-Lags with VLT-Peer
  337. Default iSCSI Optimization Values
  338. iscsi enable
  339. Displaying iSCSI Optimization Information
  340. Intermediate System to Intermediate System
  341. Multi-Topology IS-IS
  342. Interface Support
  343. Configuration Tasks for IS-IS
  344. Configuring the Distance of a Route
  345. Changing the IS-Type
  346. Redistributing IPv4 Routes
  347. Redistributing IPv6 Routes
  348. Configuring Authentication Passwords
  349. Debugging IS-IS
  350. IS-IS Metric Styles
  351. Maximum Values in the Routing Table
  352. Leaks from One Level to Another
  353. Sample Configurations
  354. Link Aggregation Control Protocol (LACP)
  355. LACP Modes
  356. LACP Configuration Tasks
  357. Setting the LACP Long Timeout
  358. Shared LAG State Tracking
  359. Important Points about Shared LAG State Tracking
  360. Layer
  361. Configuring a Static MAC Address
  362. Setting the MAC Learning Limit
  363. mac learning-limit station-move
  364. Setting Station Move Violation Actions
  365. Disabling MAC Address Learning on the System
  366. Configure Redundant Pairs
  367. Important Points about Configuring Redundant Pairs
  368. Far-End Failure Detection
  369. FEFD State Changes
  370. Configuring FEFD
  371. Debugging FEFD
  372. Link Layer Discovery Protocol (LLDP)
  373. Optional TLVs
  374. TIA-1057 (LLDP-MED) Overview
  375. Configure LLDP
  376. Enabling LLDP
  377. Enabling LLDP on Management Ports
  378. Viewing the LLDP Configuration
  379. Viewing Information Advertised by Adjacent LLDP Agents
  380. Configuring LLDPDU Intervals
  381. Configuring the Time to Live Value
  382. Debugging LLDP
  383. Relevant Management Objects
  384. Microsoft Network Load Balancing
  385. Limitations of the NLB Feature
  386. Enabling a Switch for Multicast NLB
  387. Multicast Source Discovery Protocol (MSDP)
  388. Anycast RP
  389. Enable MSDP
  390. Manage the Source-Active Cache
  391. Clearing the Source-Active Cache
  392. Specifying Source-Active Messages
  393. Limiting the Source-Active Messages from a Peer
  394. Preventing MSDP from Caching a Remote Source
  395. Logging Changes in Peership States
  396. Clearing Peer Statistics
  397. MSDP with Anycast RP
  398. Configuring Anycast RP
  399. Reducing Source-Active Message Flooding
  400. MSDP Sample Configurations
  401. Multiple Spanning Tree Protocol (MSTP)
  402. Spanning Tree Variations
  403. Related Configuration Tasks
  404. Creating Multiple Spanning Tree Instances
  405. Interoperate with Non-Dell Bridges
  406. Modifying Global Parameters
  407. Modifying the Interface Parameters
  408. Configuring an EdgePort
  409. Flush MAC Addresses after a Topology Change
  410. Debugging and Verifying MSTP Configurations
  411. Multicast Features
  412. Multicast Policies
  413. Object Tracking
  414. Track Layer 2 Interfaces
  415. Track IPv4 and IPv6 Routes
  416. Set Tracking Delays
  417. Tracking a Layer 3 Interface
  418. Track an IPv4/IPv6 Route
  419. Displaying Tracked Objects
  420. Open Shortest Path First (OSPFv2 and OSPFv3)
  421. Area Types
  422. Networks and Neighbors
  423. Designated and Backup Designated Routers
  424. Router Priority and Cost
  425. OSPF with Dell Networking OS
  426. Graceful Restart
  427. Fast Convergence (OSPFv2, IPv4 Only)
  428. OSPF ACK Packing
  429. router ospf
  430. ip ospf cost
  431. show ip route summary
  432. Configuration Task List for OSPFv3 (OSPF for IPv6)
  433. Enabling IPv6 Unicast Routing
  434. Assigning Area ID on an Interface
  435. Assigning OSPFv3 Process ID and Router ID to a VRF
  436. Configuring Stub Areas
  437. Configuring a Default Route
  438. OSPFv3 Authentication Using IPsec
  439. Troubleshooting OSPFv3
  440. Policy-based Routing (PBR)
  441. Implementing PBR
  442. PBR Exceptions (Permit)
  443. Apply a Redirect-list to an Interface using a Redirect-group
  444. Sample Configuration
  445. PIM Sparse-Mode (PIM-SM)
  446. Refuse Multicast Traffic
  447. Configuring S,G Expiry Timers
  448. Configuring a Static Rendezvous Point
  449. Creating Multicast Boundaries and Domains
  450. PIM Source-Specific Mode (PIM-SSM)
  451. Configuring PIM-SSM with IGMPv2
  452. Port Monitoring
  453. Configuring Port Monitoring
  454. Configuring Monitor Multicast Queue
  455. Remote Port Mirroring Example
  456. Displaying Remote-Port Mirroring Configurations
  457. Configuring the Sample Remote Port Mirroring
  458. Encapsulated Remote Port Monitoring
  459. ERPM Behavior on a typical Dell Networking OS
  460. Private VLANs (PVLAN)
  461. Using the Private VLAN Commands
  462. Configuration Task List
  463. Creating a Primary VLAN
  464. Creating a Community VLAN
  465. Private VLAN Configuration Example
  466. Inspecting the Private VLAN Configuration
  467. Per-VLAN Spanning Tree Plus (PVST+)
  468. Disabling PVST
  469. Modifying Global PVST+ Parameters
  470. Modifying Interface PVST+ Parameters
  471. PVST+ Sample Configurations
  472. Quality of Service (QoS)
  473. Honoring dot1p Priorities on Ingress Traffic
  474. Configuring Port-Based Rate Policing
  475. Policy-Based QoS Configurations
  476. Dot1p to Queue Mapping Requirement
  477. Create a QoS Policy
  478. DSCP Color Maps
  479. Create Policy Maps
  480. Enabling QoS Rate Adjustment
  481. Queue Classification Requirements for PFC Functionality
  482. Weighted Random Early Detection
  483. Applying a WRED Profile to Traffic
  484. Displaying egress–queue Statistics
  485. Specifying Policy-Based Rate Shaping in Packets Per Second
  486. Configuring Policy-Based Rate Shaping
  487. Global Service Pools With WRED and ECN Settings
  488. Configuring WRED and ECN Attributes
  489. Sample configuration to mark non-ecn packets as "yellow" with Multiple traffic class
  490. Sample configuration to mark non-ecn packets as "yellow" with single traffic class
  491. Applying Layer 2 Match Criteria on a Layer 3 Interface
  492. Managing Hardware Buffer Statistics
  493. Routing Information Protocol (RIP)
  494. RIP Configuration Example
  495. Remote Monitoring (RMON)
  496. Setting the RMON Alarm
  497. Configuring RMON Collection Statistics
  498. Rapid Spanning Tree Protocol (RSTP)
  499. RSTP and VLT
  500. Enabling Rapid Spanning Tree Protocol Globally
  501. Adding and Removing Interfaces
  502. Enabling SNMP Traps for Root Elections and Topology Changes
  503. Influencing RSTP Root Selection
  504. Configuring Fast Hellos for Link State Detection
  505. Software-Defined Networking (SDN)
  506. Security
  507. AAA Authentication
  508. Configuration Task List for AAA Authentication
  509. Obscuring Passwords and Keys
  510. Privilege Levels Overview
  511. RADIUS
  512. privilege levels
  513. Configuration Task List for RADIUS
  514. TACACS
  515. TACACS+ Remote Authentication
  516. Command Authorization
  517. Using SCP with SSH to Copy a Software Image
  518. Removing the RSA Host Keys and Zeroizing Storage
  519. Configuring the SSH Server Key Exchange Algorithm
  520. Configuring the SSH Server Cipher List
  521. Troubleshooting SSH
  522. VTY Line Local Authentication and Authorization
  523. VTY MAC-SA Filter Support
  524. Overview of RBAC
  525. User Roles
  526. AAA Authentication and Authorization for Roles
  527. Role Accounting
  528. Display Information About User Roles
  529. Service Provider Bridging
  530. Creating Access and Trunk Ports
  531. Enable VLAN-Stacking for a VLAN
  532. Debugging VLAN Stacking
  533. vlan stacking
  534. VLAN Stacking Packet Drop Precedence
  535. Honoring the Incoming DEI Value
  536. Marking Egress Packets with a DEI Value
  537. Mapping C-Tag to S-Tag dot1p Values
  538. Layer 2 Protocol Tunneling
  539. Specifying a Destination MAC Address for BPDUs
  540. Debugging Layer 2 Protocol Tunneling
  541. sFlow
  542. Enabling and Disabling sFlow on an Interface
  543. sFlow Show Commands
  544. Displaying Show sFlow on a Stack-unit
  545. Back-Off Mechanism
  546. Simple Network Management Protocol (SNMP)
  547. Configuration Task List for SNMP
  548. Creating a Community
  549. Reading Managed Object Values
  550. Writing Managed Object Values
  551. Subscribing to Managed Object Value Updates using SNMP
  552. Enabling a Subset of SNMP Traps
  553. Copy Configuration Files Using SNMP
  554. Copying a Configuration File
  555. Copying Configuration Files via SNMP
  556. Copying the Startup-Config Files to the Running-Config
  557. Copy a Binary File to the Startup-Configuration
  558. Obtaining a Value for MIB Objects
  559. MIB Support to Display the Available Memory Size on Flash
  560. Viewing the Software Core Files Generated by the System
  561. Displaying the Ports in a VLAN
  562. Managing Overload on Startup
  563. Fetch Dynamic MAC Entries using SNMP
  564. Deriving Interface Indices
  565. Monitor Port-Channels
  566. Troubleshooting SNMP Operation
  567. Storm Control
  568. Configuring Storm Control from CONFIGURATION Mode
  569. Detect PFC Storm
  570. Spanning Tree Protocol (STP)
  571. Configure Spanning Tree
  572. Configuring Interfaces for Layer 2 Mode
  573. Enabling Spanning Tree Protocol Globally
  574. Adding an Interface to the Spanning Tree Group
  575. Modifying Interface STP Parameters
  576. Enabling PortFast
  577. Selecting STP Root
  578. Root Guard Scenario
  579. STP Loop Guard
  580. Configuring Loop Guard
  581. Displaying STP Guard Configuration
  582. SupportAssist
  583. Configuring SupportAssist Using a Configuration Wizard
  584. Configuring SupportAssist Activity
  585. Configuring SupportAssist Company
  586. Configuring SupportAssist Person
  587. Viewing SupportAssist Configuration
  588. System Time and Date
  589. Protocol Overview
  590. Enabling NTP
  591. Disabling NTP on an Interface
  592. Configuring a Custom-defined Period for NTP time Synchronization
  593. Setting the Timezone
  594. Setting Recurring Daylight Saving Time
  595. Uplink Failure Detection (UFD)
  596. How Uplink Failure Detection Works
  597. UFD and NIC Teaming
  598. Configuring Uplink Failure Detection
  599. Clearing a UFD-Disabled Interface
  600. Displaying Uplink Failure Detection
  601. Sample Configuration: Uplink Failure Detection
  602. Tunneling
  603. Configuring Tunnel Keepalive Settings
  604. Configuring a Tunnel Interface
  605. Configuring Tunnel source anylocal Decapsulation
  606. Upgrade Procedures
  607. Virtual LANs (VLANs)
  608. Default VLAN
  609. VLANs and Port Tagging
  610. Assigning Interfaces to a VLAN
  611. Moving Untagged Interfaces
  612. Assigning an IP Address to a VLAN
  613. Enabling Null VLAN as the Default VLAN
  614. VLT Proxy Gateway
  615. Guidelines for Enabling the VLT Proxy Gateway
  616. Enable VLT Proxy Gateway
  617. LLDP VLT Proxy Gateway in a Square VLT Topology
  618. Configuring a Static VLT Proxy Gateway
  619. Virtual Link Trunking (VLT)
  620. VLT on Core Switches
  621. VLT Terminology
  622. Configure Virtual Link Trunking
  623. Configuration Notes
  624. Primary and Secondary VLT Peers
  625. VLT and IGMP Snooping
  626. VLT Routing
  627. Non-VLT ARP Sync
  628. Preventing Forwarding Loops in a VLT Domain
  629. PVST+ Configuration
  630. eVLT Configuration Example
  631. PIM-Sparse Mode Configuration Example
  632. Additional VLT Sample Configurations
  633. Troubleshooting VLT
  634. Reconfiguring Stacked Switches as VLT
  635. Association of VLTi as a Member of a PVLAN
  636. PVLAN Operations When a VLT Peer is Restarted
  637. Configuring a VLT VLAN or LAG in a PVLAN
  638. Creating a VLT LAG or a VLT VLAN
  639. Associating the VLT LAG or VLT VLAN in a PVLAN
  640. Working of Proxy ARP for VLT Peer Nodes
  641. VLT Nodes as Rendezvous Points for Multicast Resiliency
  642. Virtual Extensible LAN (VXLAN)
  643. Components of VXLAN network
  644. Functional Overview of VXLAN Gateway
  645. Components of VXLAN Frame Format
  646. Configuring VxLAN Gateway
  647. Advertising VXLAN Access Ports to Controller
  648. Displaying VXLAN Configurations
  649. VXLAN Service nodes for BFD
  650. Virtual Routing and Forwarding (VRF)
  651. VRF Configuration Notes
  652. DHCP
  653. Assigning an Interface to a VRF
  654. Assigning an OSPF Process to a VRF Instance
  655. Configuring Management VRF
  656. Sample VRF Configuration
  657. Route Leaking VRFs
  658. Dynamic Route Leaking
  659. Configuring Route Leaking with Filtering
  660. Virtual Router Redundancy Protocol (VRRP)
  661. VRRP Benefits
  662. VRRP Configuration
  663. configuring vrrp authentication
  664. show track
  665. Setting VRRP Initialization Delay
  666. VRRP in a VRF Configuration
  667. VRRP for IPv6 Configuration
  668. Debugging and Diagnostics
  669. Trace Logs
  670. Recognize an Overtemperature Condition
  671. Troubleshoot an Over-temperature Condition
  672. Recognize an Under-Voltage Condition
  673. Deciding to Tune Buffers
  674. Using a Pre-Defined Buffer Profile
  675. Sample Buffer Profile Configuration
  676. Dataplane Statistics
  677. Display Stack Port Statistics
  678. Enabling Application Core Dumps
  679. Enabling TCP Dumps
  680. Standards Compliance
  681. RFC and I-D Compliance
  682. General IPv4 Protocols
  683. General IPv6 Protocols
  684. Border Gateway Protocol (BGP)
  685. Intermediate System to Intermediate System (IS-IS)
  686. Multicast
  687. MIB Location
S6100 first page preview

S6100

Brand: Dell | Category: Switch
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Table Of Contents
  16. Table Of Contents
  17. Table Of Contents
  18. Table Of Contents
  19. Table Of Contents
  20. Table Of Contents
  21. Table Of Contents
  22. Table Of Contents
  23. Table Of Contents
  24. Table Of Contents
  25. Table Of Contents
  26. Table Of Contents
  27. Table Of Contents
  28. Table Of Contents
  29. Table Of Contents
  30. Table Of Contents
  31. Table Of Contents
  32. About this Guide
  33. Configuration Fundamentals
  34. Navigating CLI Modes
  35. The do Command
  36. Obtaining Help
  37. Command History
  38. Multiple Users in Configuration Mode
  39. Getting Started
  40. Console Access
  41. Micro USB-B Access
  42. Default Configuration
  43. Configure a Management Route
  44. Configuration File Management
  45. Mounting an NFS File System
  46. Save the Running-Configuration
  47. Configure the Overload Bit for a Startup Scenario
  48. Managing the File System
  49. Upgrading Dell Networking OS
  50. Verify Software Images Before Installation
  51. Management
  52. Creating a Custom Privilege Level
  53. Applying a Privilege Level to a Username
  54. Audit and Security Logs
  55. Configuring Logging Format
  56. Log Messages in the Internal Buffer
  57. Track Login Activity
  58. Display Login Statistics
  59. Limit Concurrent Login Sessions
  60. Enabling the System to Clear Existing Sessions
  61. Enabling Secured CLI Mode
  62. Display the Logging Buffer and the Logging Configuration
  63. Synchronizing Log Messages
  64. Enabling Timestamp on Syslog Messages
  65. Enabling the FTP Server
  66. Terminal Lines
  67. Configuring Login Authentication for Terminal Lines
  68. Setting Timeout for EXEC Privilege Mode
  69. Using Telnet to get to Another Network Device
  70. LPC Bus Quality Degradation
  71. LBQA (LPC Bus Quality Analyzer) Failure Detection mode
  72. Restoring Factory Default Environment Variables
  73. Reloading the system
  74. Port-Authentication Process
  75. EAP over RADIUS
  76. Important Points to Remember
  77. Configuring dot1x Profile
  78. Configuring MAC addresses for a do1x Profile
  79. Configuring Critical VLAN
  80. Configuring Request Identity Re-Transmissions
  81. Configuring a Quiet Period after a Failed Authentication
  82. Forcibly Authorizing or Unauthorizing a Port
  83. Re-Authenticating a Port
  84. Configuring Dynamic VLAN Assignment with Port Authentication
  85. Guest and Authentication-Fail VLANs
  86. Configuring Timeouts
  87. Multi-Host Authentication
  88. Multi-Supplicant Authentication
  89. MAC Authentication Bypass
  90. MAB in Single-host and Multi-Host Mode
  91. Dynamic CoS with 802.1X
  92. Access Control Lists (ACLs)
  93. IP Access Control Lists (ACLs)
  94. CAM Usage
  95. Configure ACL Range Profiles
  96. Configuration Task List for Route Maps
  97. Configuring Match Routes
  98. Configuring Set Conditions
  99. Configure a Route Map for Route Redistribution
  100. Configure a Route Map for Route Tagging
  101. IP Fragments ACL Examples
  102. Configure a Standard IP ACL
  103. Configuring a Standard IP ACL Filter
  104. Configure an Extended IP ACL
  105. Configuring Filters Without a Sequence Number
  106. Assign an IP ACL to an Interface
  107. Counting ACL Hits
  108. Configure Egress ACLs
  109. Applying Egress Layer 3 ACLs (Control-Plane)
  110. Implementation Information
  111. ACL Resequencing
  112. Resequencing an ACL or Prefix List
  113. Route Maps
  114. Behavior of Flow-Based Monitoring
  115. Enabling Flow-Based Monitoring
  116. Sample Configuration
  117. Example of viewing IP mirror–access–group applied to an Interface
  118. Bidirectional Forwarding Detection (BFD)
  119. BFD Packet Format
  120. BFD Sessions
  121. BFD Three-Way Handshake
  122. Session State Changes
  123. Configure BFD for Physical Ports
  124. Configure BFD for Static Routes
  125. Configure BFD for OSPF
  126. Configure BFD for OSPFv3
  127. Configure BFD for IS-IS
  128. Configure BFD for BGP
  129. Configure BFD for VRRP
  130. Configuring Protocol Liveness
  131. Border Gateway Protocol IPv4 (BGPv4)
  132. Sessions and Peers
  133. Route Reflectors
  134. BGP Attributes
  135. Weight
  136. Multi-Exit Discriminators (MEDs)
  137. Origin
  138. Next Hop
  139. Implement BGP with Dell Networking OS
  140. Ignore Router-ID in Best-Path Calculation
  141. AS Number Migration
  142. BGP4 Management Information Base (MIB)
  143. Configuration Information
  144. Enabling BGP
  145. Configuring AS4 Number Representations
  146. Configuring Peer Groups
  147. Configuring BGP Fast Fall-Over
  148. Configuring Passive Peering
  149. Allowing an AS Number to Appear in its Own AS Path
  150. Enabling Graceful Restart
  151. Enabling Neighbor Graceful Restart
  152. Regular Expressions as Filters
  153. Redistributing Routes
  154. Enabling Additional Paths
  155. Configuring an IP Extended Community List
  156. Filtering Routes with Community Lists
  157. Manipulating the COMMUNITY Attribute
  158. Changing MED Attributes
  159. Configuring the local System or a Different System to be the Next Hop for BGP-Learned Routes
  160. Changing the WEIGHT Attribute
  161. Filtering BGP Routes Using Route Maps
  162. Configuring BGP Route Reflectors
  163. Aggregating Routes
  164. Enabling Route Flap Dampening
  165. Changing BGP Timers
  166. Enabling or disabling BGP neighbors
  167. Route Map Continue
  168. Configure IPv6 NH Automatically for IPv6 Prefix Advertised over IPv4 Neighbor
  169. Storing Last and Bad PDUs
  170. Capturing PDUs
  171. PDU Counters
  172. Content Addressable Memory (CAM)
  173. Test CAM Usage
  174. View CAM Usage
  175. CAM Optimization
  176. Syslog Warning Upon 90 Percent Utilization of CAM
  177. Control Plane Policing (CoPP)
  178. Configure Control Plane Policing
  179. Configuring CoPP for Protocols
  180. Configuring CoPP for CPU Queues
  181. Protocol to CPU Queue Mapping
  182. Displaying CoPP Configuration
  183. Data Center Bridging (DCB)
  184. Priority-Based Flow Control
  185. Enhanced Transmission Selection
  186. Data Center Bridging Exchange Protocol (DCBx)
  187. Data Center Bridging in a Traffic Flow
  188. DCB Maps and its Attributes
  189. Configuring Priority-Based Flow Control
  190. Configuring Lossless Queues
  191. Configuring PFC in a DCB Map
  192. PFC Prerequisites and Restrictions
  193. Configuring PFC without a DCB Map
  194. Buffer Sizes for Lossless or PFC Packets
  195. Example Scenario
  196. Configuring Shared Head Room Buffer
  197. Monitoring Buffer Statistics for Tracking Purposes
  198. SNMP Support for PFC and Buffer Statistics Tracking
  199. Configuration Example for DSCP and PFC Priorities
  200. Configure Enhanced Transmission Selection
  201. ETS Operation with DCBx
  202. Hierarchical Scheduling in ETS Output Policies
  203. DCBx Operation
  204. DCB Configuration Exchange
  205. Configuration Source Election
  206. Auto-Detection and Manual Configuration of the DCBx Version
  207. DCBx Prerequisites and Restrictions
  208. Verifying the DCB Configuration
  209. QoS dot1p Traffic Classification and Queue Assignment
  210. Sample DCB Configuration
  211. PFC and ETS Configuration Command Examples
  212. Dynamic Host Configuration Protocol (DHCP)
  213. Assign an IP Address using DHCP
  214. Configuring the Server for Automatic Address Allocation
  215. Specifying a Default Gateway
  216. Using NetBIOS WINS for Address Resolution
  217. Using DHCP Clear Commands
  218. ip address dhcp
  219. DHCP Client on a Management Interface
  220. Configure the System for User Port Stacking (Option 230)
  221. Option 82
  222. enabling dhcp snooping
  223. Drop DHCP Packets on Snooped VLANs Only
  224. Dynamic ARP Inspection
  225. Configuring Dynamic ARP Inspection
  226. Source Address Validation
  227. DHCP MAC Source Address Validation
  228. Viewing the Number of SAV Dropped Packets
  229. Equal Cost Multi-Path (ECMP)
  230. Managing ECMP Group Paths
  231. Modifying the ECMP Group Threshold
  232. Support for ECMP in host table
  233. Flow-based Hashing for ECMP
  234. FIP Snooping
  235. FIP Snooping on Ethernet Bridges
  236. Using FIP Snooping
  237. Enabling the FCoE Transit Feature
  238. Enable FIP Snooping on VLANs
  239. Impact on Other Software Features
  240. Displaying FIP Snooping Information
  241. FCoE Transit Configuration Example
  242. Flex Hash and Optimized Boot-Up
  243. Configuring Fast Boot and LACP Fast Switchover
  244. Guidelines for Configuring Optimized Booting Mechanism
  245. Interoperation of Applications with Fast Boot and System States
  246. BGP Graceful Restart
  247. Changes to BGP Multipath
  248. Preserving 802.1Q VLAN Tag Value for Lite Subinterfaces
  249. Force10 Resilient Ring Protocol (FRRP)
  250. Ring Status
  251. Important FRRP Points
  252. Important FRRP Concepts
  253. Implementing FRRP
  254. Configuring the Control VLAN
  255. Configuring and Adding the Member VLANs
  256. Setting the FRRP Timers
  257. Viewing the FRRP Information
  258. FRRP Support on VLT
  259. GARP VLAN Registration Protocol (GVRP)
  260. Configure GVRP
  261. Enabling GVRP Globally
  262. Configure a GARP Timer
  263. Internet Group Management Protocol (IGMP)
  264. leaving a multicast group
  265. IGMP Version 3
  266. Configure IGMP
  267. Viewing IGMP Enabled Interfaces
  268. Adjusting Timers
  269. Enabling IGMP Immediate-Leave
  270. Removing a Group-Port Association
  271. Configuring the Switch as Querier
  272. Egress Interface Selection (EIS) for HTTP and IGMP Applications
  273. Enabling and Disabling Management Egress Interface Selection
  274. Handling of Management Route Configuration
  275. Handling of Switch-Destined Traffic
  276. Handling of Transit Traffic (Traffic Separation)
  277. Behavior of Various Applications for Switch-Initiated Traffic
  278. Behavior of Various Applications for Switch-Destined Traffic
  279. Interworking of EIS With Various Applications
  280. Interfaces
  281. Interface Types
  282. Resetting an Interface to its Factory Default State
  283. Enabling a Physical Interface
  284. Overview of Layer Modes
  285. Configuring Layer 2 (Interface) Mode
  286. Egress Interface Selection (EIS)
  287. Management Interfaces
  288. Configuring a Management Interface on an Ethernet Port
  289. S6100 — OIR
  290. Loopback Interfaces
  291. Null Interfaces
  292. Interfaces in Port Channels
  293. Creating a Port Channel
  294. Reassigning an Interface to a New Port Channel
  295. Adding or Removing a Port Channel from a VLAN
  296. Assigning an IP Address to a Port Channel
  297. Load-Balancing Method
  298. Bulk Configuration
  299. Bulk Configuration Examples
  300. Defining Interface Range Macros
  301. Define the Interface Range
  302. Split 40G Ports on a 16X40G QSFP+ Module
  303. Splitting 100G Ports
  304. Link Dampening
  305. Link Bundle Monitoring
  306. Enabling Pause Frames
  307. Port-Pipes
  308. FEC Configuration
  309. Setting the Speed of Ethernet Interfaces
  310. Adjusting the Keepalive Timer
  311. Configuring the Interface Sampling Size
  312. Configuring the Traffic Sampling Size Globally
  313. Dynamic Counters
  314. Clearing Interface Counters
  315. Compressing Configuration Files
  316. IPv4 Routing
  317. IP Addresses
  318. Configuring Static Routes
  319. Configure Static Routes for the Management Interface
  320. Using the Configured Source IP Address in ICMP Messages
  321. Enabling Directed Broadcast
  322. Specifying the Local System Domain and a List of Domains
  323. Configuration Tasks for ARP
  324. Enabling Proxy ARP
  325. Enabling ARP Learning via Gratuitous ARP
  326. Configuring ARP Retries
  327. UDP Helper
  328. Configurations Using UDP Helper
  329. UDP Helper with Subnet Broadcast Addresses
  330. UDP Helper with No Configured Broadcast Addresses
  331. IPv6 Routing
  332. Extended Address Space
  333. Longest Prefix Match (LPM) Table and IPv6 /65 – /128 support
  334. IPv6 Header Fields
  335. Extension Header Fields
  336. Addressing
  337. Implementing IPv6 with Dell Networking OS
  338. IPv6 Neighbor Discovery
  339. Debugging IPv6 RDNSS Information Sent to the Host
  340. Displaying IPv6 RDNSS Information
  341. Configuration Tasks for IPv6
  342. Assigning an IPv6 Address to an Interface
  343. Configuring Telnet with IPv6
  344. Displaying an IPv6 Interface Information
  345. Showing IPv6 Routes
  346. Showing the Running-Configuration for an Interface
  347. Disabling ND Entry Timeout
  348. Configuring IPv6 RA Guard on an Interface
  349. iSCSI Optimization
  350. Monitoring iSCSI Traffic Flows
  351. Detection and Auto-Configuration for Dell EqualLogic Arrays
  352. Synchronizing iSCSI Sessions Learned on VLT-Lags with VLT-Peer
  353. Default iSCSI Optimization Values
  354. iscsi enable
  355. Displaying iSCSI Optimization Information
  356. Intermediate System to Intermediate System
  357. Multi-Topology IS-IS
  358. Interface Support
  359. Configuration Tasks for IS-IS
  360. Configuring the Distance of a Route
  361. Changing the IS-Type
  362. Redistributing IPv4 Routes
  363. Redistributing IPv6 Routes
  364. Configuring Authentication Passwords
  365. Debugging IS-IS
  366. IS-IS Metric Styles
  367. Maximum Values in the Routing Table
  368. Leaks from One Level to Another
  369. Sample Configurations
  370. Link Aggregation Control Protocol (LACP)
  371. LACP Modes
  372. LACP Configuration Tasks
  373. Setting the LACP Long Timeout
  374. Shared LAG State Tracking
  375. Important Points about Shared LAG State Tracking
  376. Layer
  377. Configuring a Static MAC Address
  378. Setting the MAC Learning Limit
  379. mac learning-limit station-move
  380. Setting Station Move Violation Actions
  381. Disabling MAC Address Learning on the System
  382. Configure Redundant Pairs
  383. Important Points about Configuring Redundant Pairs
  384. Far-End Failure Detection
  385. FEFD State Changes
  386. Configuring FEFD
  387. Debugging FEFD
  388. Link Layer Discovery Protocol (LLDP)
  389. Optional TLVs
  390. TIA-1057 (LLDP-MED) Overview
  391. Configure LLDP
  392. Enabling LLDP
  393. Enabling LLDP on Management Ports
  394. Viewing the LLDP Configuration
  395. Viewing Information Advertised by Adjacent LLDP Agents
  396. Configuring LLDPDU Intervals
  397. Configuring the Time to Live Value
  398. Debugging LLDP
  399. Relevant Management Objects
  400. Microsoft Network Load Balancing
  401. Limitations of the NLB Feature
  402. Enabling a Switch for Multicast NLB
  403. Multicast Source Discovery Protocol (MSDP)
  404. Anycast RP
  405. Enable MSDP
  406. Manage the Source-Active Cache
  407. Clearing the Source-Active Cache
  408. Specifying Source-Active Messages
  409. Limiting the Source-Active Messages from a Peer
  410. Preventing MSDP from Caching a Remote Source
  411. Logging Changes in Peership States
  412. Clearing Peer Statistics
  413. MSDP with Anycast RP
  414. Configuring Anycast RP
  415. Reducing Source-Active Message Flooding
  416. MSDP Sample Configurations
  417. Multiple Spanning Tree Protocol (MSTP)
  418. Spanning Tree Variations
  419. Related Configuration Tasks
  420. Creating Multiple Spanning Tree Instances
  421. Interoperate with Non-Dell Bridges
  422. Modifying Global Parameters
  423. Modifying the Interface Parameters
  424. Configuring an EdgePort
  425. Flush MAC Addresses after a Topology Change
  426. Debugging and Verifying MSTP Configurations
  427. Multicast Features
  428. Multicast Policies
  429. Understanding Multicast Traceroute (mtrace)
  430. Supported Error Codes
  431. mtrace Scenarios
  432. Object Tracking
  433. Track Layer 2 Interfaces
  434. Track IPv4 and IPv6 Routes
  435. Set Tracking Delays
  436. Tracking a Layer 3 Interface
  437. Track an IPv4/IPv6 Route
  438. Displaying Tracked Objects
  439. Open Shortest Path First (OSPFv2 and OSPFv3)
  440. Area Types
  441. Networks and Neighbors
  442. Designated and Backup Designated Routers
  443. Router Priority and Cost
  444. OSPF with Dell Networking OS
  445. Graceful Restart
  446. Fast Convergence (OSPFv2, IPv4 Only)
  447. OSPF ACK Packing
  448. router ospf
  449. show ip route summary
  450. Configuration Task List for OSPFv3 (OSPF for IPv6)
  451. Enabling IPv6 Unicast Routing
  452. Assigning Area ID on an Interface
  453. Assigning OSPFv3 Process ID and Router ID to a VRF
  454. Configuring Stub Areas
  455. Configuring a Default Route
  456. OSPFv3 Authentication Using IPsec
  457. Troubleshooting OSPFv3
  458. Policy-based Routing (PBR)
  459. Implementing PBR
  460. PBR Exceptions (Permit)
  461. Apply a Redirect-list to an Interface using a Redirect-group
  462. PIM Sparse-Mode (PIM-SM)
  463. Refuse Multicast Traffic
  464. Configuring S,G Expiry Timers
  465. Configuring a Static Rendezvous Point
  466. Creating Multicast Boundaries and Domains
  467. PIM Source-Specific Mode (PIM-SSM)
  468. Configure PIM-SSM
  469. Configuring PIM-SSM with IGMPv2
  470. Electing an RP using the BSR Mechanism
  471. Port Monitoring
  472. Configuring Port Monitoring
  473. Configuring Monitor Multicast Queue
  474. Remote Port Mirroring Example
  475. Displaying Remote-Port Mirroring Configurations
  476. Configuring the Sample Remote Port Mirroring
  477. Encapsulated Remote Port Monitoring
  478. ERPM Behavior on a typical Dell Networking OS
  479. Port Monitoring on VLT
  480. VLT Fail-over Scenario
  481. Private VLANs (PVLAN)
  482. Using the Private VLAN Commands
  483. Configuration Task List
  484. Creating a Primary VLAN
  485. Creating a Community VLAN
  486. Private VLAN Configuration Example
  487. Inspecting the Private VLAN Configuration
  488. Per-VLAN Spanning Tree Plus (PVST+)
  489. Disabling PVST
  490. Modifying Global PVST+ Parameters
  491. Modifying Interface PVST+ Parameters
  492. PVST+ Sample Configurations
  493. Quality of Service (QoS)
  494. Honoring dot1p Priorities on Ingress Traffic
  495. Configuring Port-Based Rate Policing
  496. Policy-Based QoS Configurations
  497. Dot1p to Queue Mapping Requirement
  498. Create a QoS Policy
  499. DSCP Color Maps
  500. Create Policy Maps
  501. Enabling QoS Rate Adjustment
  502. Queue Classification Requirements for PFC Functionality
  503. Weighted Random Early Detection
  504. Applying a WRED Profile to Traffic
  505. Displaying egress–queue Statistics
  506. Specifying Policy-Based Rate Shaping in Packets Per Second
  507. Configuring Policy-Based Rate Shaping
  508. Global Service Pools With WRED and ECN Settings
  509. Configuring WRED and ECN Attributes
  510. Sample configuration to mark non-ecn packets as "yellow" with Multiple traffic class
  511. Sample configuration to mark non-ecn packets as "yellow" with single traffic class
  512. Applying Layer 2 Match Criteria on a Layer 3 Interface
  513. Managing Hardware Buffer Statistics
  514. Routing Information Protocol (RIP)
  515. RIP Configuration Example
  516. Remote Monitoring (RMON)
  517. Setting the RMON Alarm
  518. Configuring RMON Collection Statistics
  519. Rapid Spanning Tree Protocol (RSTP)
  520. RSTP and VLT
  521. Enabling Rapid Spanning Tree Protocol Globally
  522. Adding and Removing Interfaces
  523. Enabling SNMP Traps for Root Elections and Topology Changes
  524. Influencing RSTP Root Selection
  525. Configuring Fast Hellos for Link State Detection
  526. Software-Defined Networking (SDN)
  527. Security
  528. AAA Authentication
  529. Configuration Task List for AAA Authentication
  530. Obscuring Passwords and Keys
  531. Configuration Task List for Privilege Levels
  532. RADIUS
  533. Configuration Task List for RADIUS
  534. TACACS
  535. TACACS+ Remote Authentication
  536. Command Authorization
  537. Using SCP with SSH to Copy a Software Image
  538. Removing the RSA Host Keys and Zeroizing Storage
  539. Configuring the SSH Server Key Exchange Algorithm
  540. Configuring the SSH Server Cipher List
  541. Troubleshooting SSH
  542. VTY Line Local Authentication and Authorization
  543. VTY MAC-SA Filter Support
  544. Overview of RBAC
  545. User Roles
  546. AAA Authentication and Authorization for Roles
  547. Role Accounting
  548. Display Information About User Roles
  549. Two Factor Authentication (2FA)
  550. SMS-OTP Mechanism
  551. Service Provider Bridging
  552. Creating Access and Trunk Ports
  553. Enable VLAN-Stacking for a VLAN
  554. Debugging VLAN Stacking
  555. vlan stacking
  556. VLAN Stacking Packet Drop Precedence
  557. Honoring the Incoming DEI Value
  558. Marking Egress Packets with a DEI Value
  559. Mapping C-Tag to S-Tag dot1p Values
  560. Layer 2 Protocol Tunneling
  561. Specifying a Destination MAC Address for BPDUs
  562. Debugging Layer 2 Protocol Tunneling
  563. sFlow
  564. Enabling and Disabling sFlow on an Interface
  565. sFlow Show Commands
  566. Displaying Show sFlow on a Stack-unit
  567. Back-Off Mechanism
  568. Simple Network Management Protocol (SNMP)
  569. Protocol Overview
  570. Configuration Task List for SNMP
  571. Reading Managed Object Values
  572. Configuring Contact and Location Information using SNMP
  573. Enabling a Subset of SNMP Traps
  574. Enabling an SNMP Agent to Notify Syslog Server Failure
  575. Copy Configuration Files Using SNMP
  576. Copying a Configuration File
  577. Copying Configuration Files via SNMP
  578. Copying the Startup-Config Files to the Server via FTP
  579. Copy a Binary File to the Startup-Configuration
  580. Obtaining a Value for MIB Objects
  581. MIB Support to Display the Available Memory Size on Flash
  582. Viewing the Software Core Files Generated by the System
  583. MIB Support for PFC no-drop-priority L2Dlf Drop
  584. MIB Support for Monitoring the overall buffer usage for lossy and lossless traffic per XPE
  585. SNMP Support for WRED Green/Yellow/Red Drop Counters
  586. MIB Support to Display the Available Partitions on Flash
  587. MIB Support to Display the ECN Marked Packets
  588. MIB Support to Display Egress Queue Statistics
  589. MIB Support to Display the FEC BER Details
  590. Viewing the FEC BER Details
  591. MIB Support for entAliasMappingTable
  592. Viewing the LAG MIB
  593. Displaying the Ports in a VLAN
  594. Managing Overload on Startup
  595. Fetch Dynamic MAC Entries using SNMP
  596. Deriving Interface Indices
  597. Monitor Port-Channels
  598. Troubleshooting SNMP Operation
  599. Storm Control
  600. Configuring Storm Control from CONFIGURATION Mode
  601. Detect PFC Storm
  602. Spanning Tree Protocol (STP)
  603. Configure Spanning Tree
  604. Configuring Interfaces for Layer 2 Mode
  605. Enabling Spanning Tree Protocol Globally
  606. Adding an Interface to the Spanning Tree Group
  607. Modifying Interface STP Parameters
  608. Enabling PortFast
  609. Selecting STP Root
  610. Root Guard Scenario
  611. STP Loop Guard
  612. Configuring Loop Guard
  613. Displaying STP Guard Configuration
  614. SupportAssist
  615. Configuring SupportAssist Using a Configuration Wizard
  616. Configuring SupportAssist Activity
  617. Configuring SupportAssist Company
  618. Configuring SupportAssist Person
  619. Viewing SupportAssist Configuration
  620. System Time and Date
  621. Enabling NTP
  622. Disabling NTP on an Interface
  623. Configuring a Custom-defined Period for NTP time Synchronization
  624. Setting the Timezone
  625. Setting Recurring Daylight Saving Time
  626. Tunneling
  627. Configuring Tunnel Keepalive Settings
  628. Configuring a Tunnel Interface
  629. Configuring Tunnel source anylocal Decapsulation
  630. Uplink Failure Detection (UFD)
  631. How Uplink Failure Detection Works
  632. UFD and NIC Teaming
  633. Configuring Uplink Failure Detection
  634. Clearing a UFD-Disabled Interface
  635. Displaying Uplink Failure Detection
  636. Sample Configuration: Uplink Failure Detection
  637. Upgrade Procedures
  638. Virtual LANs (VLANs)
  639. Default VLAN
  640. VLANs and Port Tagging
  641. Assigning Interfaces to a VLAN
  642. Moving Untagged Interfaces
  643. Assigning an IP Address to a VLAN
  644. Enabling Null VLAN as the Default VLAN
  645. Virtual Link Trunking (VLT)
  646. VLT Terminology
  647. Layer-2 Traffic in VLT Domains
  648. Interspersed VLANs
  649. Enhanced VLT
  650. Configure Virtual Link Trunking
  651. Configuration Notes
  652. Primary and Secondary VLT Peers
  653. VLT Bandwidth Monitoring
  654. VLT Port Delayed Restoration
  655. VLT Routing
  656. Non-VLT ARP Sync
  657. RSTP Configuration
  658. Configuring VLT
  659. no ip address
  660. PVST+ Configuration
  661. Peer Routing Configuration Example
  662. Dell-1 Switch Configuration
  663. Dell-2 Switch Configuration
  664. R1 Configuration
  665. Access Switch A1 Configurations and Verification
  666. eVLT Configuration Example
  667. PIM-Sparse Mode Configuration Example
  668. Verifying a VLT Configuration
  669. Additional VLT Sample Configurations
  670. Troubleshooting VLT
  671. Reconfiguring Stacked Switches as VLT
  672. Association of VLTi as a Member of a PVLAN
  673. PVLAN Operations When One VLT Peer is Down
  674. Configuring a VLT VLAN or LAG in a PVLAN
  675. Associating the VLT LAG or VLT VLAN in a PVLAN
  676. Proxy ARP Capability on VLT Peer Nodes
  677. VLT Nodes as Rendezvous Points for Multicast Resiliency
  678. Configuring VLAN-Stack over VLT
  679. IPv6 Peer Routing in VLT Domains Overview
  680. Synchronization of IPv6 ND Entries in a Non-VLT Domain
  681. Sample Configuration of IPv6 Peer Routing in a VLT Domain
  682. VLT Proxy Gateway
  683. Guidelines for Enabling the VLT Proxy Gateway
  684. Enable VLT Proxy Gateway
  685. LLDP VLT Proxy Gateway in a Square VLT Topology
  686. Configuring a Static VLT Proxy Gateway
  687. VLT Domain Configuration
  688. Dell-2 VLT Configuration
  689. Dell-3 VLT Configuration
  690. Dell-4 VLT Configuration
  691. Virtual Extensible LAN (VXLAN)
  692. Components of VXLAN network
  693. Functional Overview of VXLAN Gateway
  694. Components of VXLAN Frame Format
  695. Configuring VxLAN Gateway
  696. Advertising VXLAN Access Ports to Controller
  697. Displaying VXLAN Configurations
  698. VXLAN Service nodes for BFD
  699. Static Virtual Extensible LAN (VXLAN)
  700. Limitations on Static VXLAN
  701. Preserving 802.1 p value across VXLAN tunnels
  702. Virtual Routing and Forwarding (VRF)
  703. VRF Configuration Notes
  704. DHCP
  705. Assigning an Interface to a VRF
  706. Assigning an OSPF Process to a VRF Instance
  707. Configuring Management VRF
  708. Sample VRF Configuration
  709. Route Leaking VRFs
  710. Dynamic Route Leaking
  711. Configuring Route Leaking with Filtering
  712. Virtual Router Redundancy Protocol (VRRP)
  713. VRRP Benefits
  714. VRRP Configuration
  715. configuring vrrp authentication
  716. show track
  717. Setting VRRP Initialization Delay
  718. VRRP in a VRF Configuration
  719. VRRP for IPv6 Configuration
  720. Debugging and Diagnostics
  721. Trace Logs
  722. Recognize an Overtemperature Condition
  723. Troubleshoot an Over-temperature Condition
  724. Recognize an Under-Voltage Condition
  725. Troubleshooting Packet Loss
  726. Displaying Drop Counters
  727. Dataplane Statistics
  728. Display Stack Port Statistics
  729. Enabling Application Core Dumps
  730. Enabling TCP Dumps
  731. Standards Compliance
  732. RFC and I-D Compliance
  733. General IPv4 Protocols
  734. General IPv6 Protocols
  735. Border Gateway Protocol (BGP)
  736. Intermediate System to Intermediate System (IS-IS)
  737. Multicast
  738. MIB Location
  739. X.509v3
  740. Advantages of X.509v3 certificates
  741. Information about installing CA certificates
  742. Creating Certificate Signing Requests (CSR)
  743. Information about installing trusted certificates
  744. Syslog over TLS
  745. Configuring OCSP behavior
  746. Verifying Server certificates
S6100 first page preview

S6100

Brand: Dell | Category: Switch
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Table Of Contents
  16. Table Of Contents
  17. Table Of Contents
  18. Table Of Contents
  19. Table Of Contents
  20. Table Of Contents
  21. Table Of Contents
  22. Table Of Contents
  23. Table Of Contents
  24. Table Of Contents
  25. Table Of Contents
  26. Table Of Contents
  27. Table Of Contents
  28. Table Of Contents
  29. Table Of Contents
  30. Table Of Contents
  31. Table Of Contents
  32. Table Of Contents
  33. Table Of Contents
  34. Table Of Contents
  35. Table Of Contents
  36. Table Of Contents
  37. Table Of Contents
  38. About this Guide
  39. Information Icons
  40. CLI Basics
  41. Obtaining Help
  42. Navigating the CLI
  43. Using the Keyword no Command
  44. Enabling Software Features on Devices Using a Command Option
  45. show feature
  46. Command Modes
  47. dhcp mode
  48. interface mode
  49. lldp mode
  50. vrrp mode
  51. File Management
  52. copy
  53. delete
  54. format
  55. fsck flash
  56. mkdir
  57. rmdir
  58. upgrade system
  59. rename
  60. show boot system
  61. show bootvar
  62. show file-systems
  63. show os-version
  64. show running-config
  65. show startup-config
  66. show version
  67. upgrade boot
  68. verify
  69. Control and Monitoring
  70. banner login
  71. banner motd
  72. cam-acl
  73. clear line
  74. configure
  75. disable
  76. enable
  77. enable cpu-clock-monitor
  78. exec-timeout
  79. exit
  80. ftp-server enable
  81. ftp-server topdir
  82. ftp-server username
  83. hostname
  84. ip ftp password
  85. ip ftp source-interface
  86. ip ftp username
  87. ip telnet server enable
  88. ip telnet server vrf
  89. ip telnet source-interface
  90. line
  91. login concurrent-session
  92. login statistics
  93. motd-banner
  94. ping
  95. reload
  96. send
  97. service timestamps
  98. show alarms
  99. show cpu-traffic-stats
  100. show debugging
  101. show inventory
  102. show login statistics
  103. show memory
  104. show processes cpu
  105. show processes ipc flow-control
  106. show processes memory
  107. show software ifm
  108. show system
  109. show tech-support
  110. ssh-peer-stack-unit
  111. stack-unit location-led
  112. telnet-peer-stack-unit
  113. traceroute
  114. undebug all
  115. write
  116. important points to remember
  117. debug dot1x
  118. dot1x auth-fail-vlan
  119. dot1x auth-server
  120. dot1x authentication (Configuration)
  121. dot1x authentication (Interface)
  122. dot1x critical-vlan
  123. dot1x guest-vlan
  124. dot1x host-mode
  125. dot1x mac-auth-bypass
  126. dot1x max-supplicants
  127. dot1x port-control
  128. dot1x profile
  129. dot1x quiet-period
  130. dot1x reauth-max
  131. dot1x server-timeout
  132. dot1x static-mab
  133. dot1x supplicant-timeout
  134. dot1x tx-period
  135. show dot1x interface
  136. show dot1x profile
  137. Access Control Lists (ACL)
  138. Commands Common to all ACL Types
  139. show config
  140. Common IP ACL Commands
  141. access-class
  142. clear counters ip access-group
  143. ip access-group
  144. ip mirror-access-group
  145. ip control-plane egress-filter
  146. show aclrange
  147. Standard IP ACL Commands
  148. ip access-list standard
  149. permit
  150. resequence access-list
  151. Extended IP ACL Commands
  152. deny
  153. deny icmp
  154. deny tcp
  155. deny udp
  156. ip access-list extended
  157. permit icmp
  158. permit tcp
  159. permit udp
  160. Extended IPv6 ACL Commands
  161. ipv6 access-list
  162. Common MAC Access List Commands
  163. mac access-group
  164. show mac access-lists
  165. show mac accounting access-list
  166. Standard MAC ACL Commands
  167. mac access-list standard
  168. Extended MAC ACL Commands
  169. mac access-list extended
  170. IP Prefix List Commands
  171. clear ip prefix-list
  172. ip prefix-list
  173. show ip prefix-list detail
  174. show ip prefix-list summary
  175. Route Map Commands
  176. description
  177. match community
  178. match interface
  179. match ip address
  180. match ip next-hop
  181. match ip route-source
  182. match metric
  183. match origin
  184. match route-type
  185. match tag
  186. route-map
  187. set as-path
  188. set automatic-tag
  189. set comm-list delete
  190. set community
  191. set level
  192. set local-preference
  193. set metric-type
  194. set next-hop
  195. set origin
  196. set tag
  197. set weight
  198. show route-map
  199. deny (for Standard IP ACLs)
  200. deny (for Extended IP ACLs)
  201. seq (for Standard IPv4 ACLs)
  202. deny tcp (for Extended IP ACLs)
  203. deny ether-type (for Extended MAC ACLs)
  204. deny (for Standard MAC ACLs)
  205. deny (for Extended MAC ACLs)
  206. permit (for Standard IP ACLs)
  207. permit arp (for Extended MAC ACLs)
  208. permit ether-type (for Extended MAC ACLs)
  209. permit icmp (for Extended IP ACLs)
  210. permit udp (for Extended IP ACLs)
  211. permit (for Extended IP ACLs)
  212. permit (for Standard MAC ACLs)
  213. seq (for Standard MAC ACLs)
  214. permit tcp (for Extended IP ACLs)
  215. seq arp (for Extended MAC ACLs)
  216. seq ether-type (for Extended MAC ACLs)
  217. seq (for IP ACLs)
  218. permit icmp (for IPv6 ACLs)
  219. permit tcp (for IPv6 ACLs)
  220. permit udp (for IPv6 ACLs)
  221. seq (for IPv6 ACLs)
  222. permit (for IPv6 ACLs)
  223. deny arp (for Extended MAC ACLs)
  224. deny icmp (for Extended IPv6 ACLs)
  225. deny tcp (for IPv6 ACLs)
  226. deny udp (for Extended IP ACLs)
  227. deny (for IPv6 ACLs)
  228. Bidirectional Forwarding Detection (BFD)
  229. ip route bfd
  230. neighbor bfd
  231. neighbor bfd disable
  232. Border Gateway Protocol
  233. aggregate-address
  234. bgp add-path
  235. bgp always-compare-med
  236. bgp asnotation
  237. bgp bestpath as-path ignore
  238. bgp bestpath as-path multipath-relax
  239. bgp bestpath med confed
  240. bgp bestpath router-id ignore
  241. bgp client-to-client reflection
  242. bgp cluster-id
  243. bgp confederation identifier
  244. bgp confederation peers
  245. bgp dampening
  246. bgp default local-preference
  247. bgp dmzlink-bw
  248. bgp enforce-first-as
  249. bgp fast-external-fallover
  250. bgp graceful-restart
  251. bgp non-deterministic-med
  252. bgp outbound-optimization
  253. bgp recursive-bgp-next-hop
  254. bgp regex-eval-optz-disable
  255. bgp router-id
  256. clear ip bgp
  257. clear ip bgp dampening
  258. clear ip bgp flap-statistics
  259. clear ip bgp peer-group
  260. debug ip bgp
  261. debug ip bgp dampening
  262. debug ip bgp events
  263. debug ip bgp keepalives
  264. debug ip bgp notifications
  265. debug ip bgp soft-reconfiguration
  266. debug ip bgp updates
  267. default-metric
  268. deny bandwidth
  269. maximum-paths
  270. neighbor activate
  271. neighbor add-path
  272. neighbor advertisement-interval
  273. neighbor advertisement-start
  274. neighbor allowas-in
  275. neighbor default-originate
  276. neighbor description
  277. neighbor distribute-list
  278. neighbor ebgp-multihop
  279. neighbor fall-over
  280. neighbor local-as
  281. neighbor maximum-prefix
  282. neighbor password
  283. neighbor peer-group (assigning peers)
  284. neighbor peer-group (creating group)
  285. neighbor remote-as
  286. neighbor remove-private-as
  287. neighbor route-map
  288. neighbor route-reflector-client
  289. neighbor send-community
  290. neighbor shutdown
  291. neighbor soft-reconfiguration inbound
  292. neighbor timers
  293. neighbor update-source
  294. neighbor weight
  295. network
  296. network backdoor
  297. permit bandwidth
  298. redistribute
  299. redistribute ospf
  300. router bgp
  301. shutdown all
  302. shutdown address-family-ipv4–unicast
  303. set extcommunity bandwidth
  304. show ip bgp
  305. show ip bgp cluster-list
  306. show ip bgp community
  307. show ip bgp community-list
  308. show ip bgp dampened-paths
  309. show ip bgp detail
  310. show ip bgp extcommunity-list
  311. show ip bgp filter-list
  312. show ip bgp flap-statistics
  313. show ip bgp inconsistent-as
  314. show ip bgp neighbors
  315. show ip bgp next-hop
  316. show ip bgp paths
  317. show ip bgp paths community
  318. show ip bgp peer-group
  319. show ip bgp regexp
  320. show ip bgp summary
  321. show running-config bgp
  322. timers bgp
  323. MBGP Commands
  324. distance bgp
  325. neighbor auto-local-address
  326. Content Addressable Memory (CAM)
  327. cam-acl (Configuration)
  328. cam-acl-egress
  329. cam-optimization
  330. show cam-acl
  331. show cam-usage
  332. test cam-usage
  333. Unified Forwarding Table Modes
  334. hardware forwarding-table mode
  335. Control Plane Policing (CoPP)
  336. cpu-protocol-group
  337. cpu-queue
  338. protocol-list
  339. queue-length
  340. service-policy rate-limit-protocols
  341. show cpu-queue rate cp
  342. show ip protocol-queue-mapping
  343. show ipv6 protocol-queue-mapping
  344. show mac protocol-queue-mapping
  345. show running-config copp-profile
  346. Data Center Bridging (DCB)
  347. dcb-enable
  348. clear hardware pfc-nodrop-priority
  349. pfc-nodrop-priority l2-dlf drop
  350. pfc priority
  351. show dcb
  352. show hardware pfc-nodrop-priority
  353. show interface pfc
  354. show interface pfc statistics
  355. ETS Commands
  356. clear ets counters
  357. DCBX Commands
  358. dcbx port-role
  359. dcbx version
  360. debug dcbx
  361. fcoe priority-bits
  362. show interface dcbx detail
  363. dcb-map
  364. priority-pgid
  365. dcb-map stack-unit all stack-ports all
  366. dcb pfc-headroom-buffer-size
  367. priority
  368. dcb-policy buffer-threshold (Interface Configuration)
  369. show running-config dcb-buffer-threshold
  370. dcb pfc-queues
  371. dcb {ets | pfc} enable
  372. Debugging and Diagnostics
  373. Offline Diagnostic Commands
  374. offline stack-unit
  375. online stack-unit
  376. Hardware Commands
  377. clear hardware system-flow
  378. clear hardware vlan-counters
  379. show hardware mac
  380. show hardware ip
  381. show hardware stack-unit
  382. show hardware stack-unit buffer
  383. show hardware buffer headroom-pool
  384. show hardware buffer-stats-snapshot
  385. show hardware counters interface
  386. show hardware drops
  387. show hardware system-flow
  388. show hardware vlan-counters
  389. show hardware stack-unit buffer-stats-snapshot
  390. show hardware stack-unit buffer-stats-snapshot (Total Buffer Information)
  391. clear ip dhcp
  392. debug ip dhcp server
  393. debug ipv6 dhcp
  394. dns-server
  395. excluded-address
  396. hardware-address
  397. host
  398. netbios-name-server
  399. netbios-node-type
  400. pool
  401. show ip dhcp configuration
  402. show ip dhcp conflict
  403. show ip dhcp server
  404. arp inspection
  405. arp inspection-trust
  406. clear ipv6 dhcp snooping binding
  407. ip dhcp snooping
  408. ipv6 dhcp snooping
  409. ipv6 dhcp snooping vlan
  410. IPv6 DHCP Snooping Binding
  411. ip dhcp snooping database
  412. ip dhcp snooping database renew
  413. ipv6 dhcp snooping database renew
  414. ipv6 dhcp snooping trust
  415. ip dhcp relay information-option
  416. ip dhcp snooping verify mac-address
  417. ipv6 dhcp snooping verify mac-address
  418. ip helper-address
  419. show ip dhcp snooping
  420. show ipv6 dhcp snooping
  421. Commands to Configure DNS
  422. ip domain-name
  423. ip domain-list
  424. clear host
  425. Equal Cost Multi-Path (ECMP)
  426. hash-algorithm
  427. ip ecmp-group
  428. ip ecmp weighted
  429. link-bundle-distribution trigger-threshold
  430. Flex Hash and Optimized Boot-Up
  431. load-balance flexhash
  432. reload-type fastboot
  433. lacp fast-switchover
  434. FIP Snooping
  435. clear fip-snooping statistics
  436. debug fip snooping rx
  437. feature fip-snooping
  438. fip-snooping enable
  439. fip-snooping fc-map
  440. fip-snooping port-mode fcf
  441. fip-snooping port-mode fcoe-trusted
  442. show fip-snooping enode
  443. show fip-snooping fcf
  444. show fip-snooping statistics
  445. show fip-snooping system
  446. show fips status
  447. Force10 Resilient Ring Protocol (FRRP)
  448. debug frrp
  449. interface
  450. member-vlan
  451. protocol frrp
  452. show frrp
  453. timer
  454. GARP VLAN Registration (GVRP)
  455. clear gvrp statistics
  456. debug gvrp
  457. garp timers
  458. gvrp enable
  459. gvrp registration
  460. protocol gvrp
  461. show garp timers
  462. show gvrp
  463. show gvrp statistics
  464. ICMP Message Types
  465. Internet Group Management Protocol (IGMP)
  466. debug ip igmp
  467. ip igmp access-group
  468. ip igmp immediate-leave
  469. ip igmp last-member-query-interval
  470. ip igmp query-interval
  471. ip igmp query-max-resp-time
  472. ip igmp ssm-map
  473. ip igmp version
  474. show ip igmp groups
  475. show ip igmp interface
  476. show ip igmp ssm-map
  477. IGMP Snooping Commands
  478. clear ip igmp snooping groups
  479. debug ip igmp snooping
  480. ip igmp snooping enable
  481. ip igmp snooping fast-leave
  482. ip igmp snooping last-member-query-interval
  483. ip igmp snooping mrouter
  484. ip igmp snooping querier
  485. show ip igmp snooping groups
  486. show ip igmp snooping mrouter
  487. clear counters
  488. clear dampening
  489. dampening
  490. default interface
  491. fec default
  492. flowcontrol
  493. interface group
  494. interface loopback
  495. interface managementEthernet
  496. interface null
  497. interface range
  498. interface range macro (define)
  499. interface range macro name
  500. interface vlan
  501. intf-type cr4 autoneg
  502. keepalive
  503. monitor interface
  504. negotiation auto
  505. portmode hybrid
  506. rate-interval
  507. rate-interval (Configuration Mode)
  508. show config (for speed)
  509. show config (from INTERFACE RANGE mode)
  510. show interfaces configured
  511. show interfaces dampening
  512. show interfaces stack-unit
  513. show interfaces status
  514. show interfaces vlan
  515. show system stack-unit fanout configured
  516. show interfaces switchport
  517. show interfaces transceiver
  518. show range
  519. shutdown
  520. speed (for 10/100/1000/10000 interfaces)
  521. speed (Management interface)
  522. stack-unit portmode
  523. switchport
  524. Port Channel Commands
  525. group
  526. interface port-channel
  527. minimum-links
  528. port-channel failover-group
  529. show interfaces port-channel
  530. show port-channel-flow
  531. Enhanced Validation of Interface Ranges
  532. IPv4 Routing
  533. arp backoff-time
  534. arp max-entries
  535. arp retries
  536. arp timeout
  537. clear arp-cache
  538. clear ip fib stack-unit
  539. clear ip route
  540. clear tcp statistics
  541. debug arp
  542. debug ip dhcp
  543. debug ip icmp
  544. debug ip packet
  545. ip address
  546. ip directed-broadcast
  547. ip domain-lookup
  548. ip helper-address hop-count disable
  549. ip icmp source-interface
  550. ipv6 icmp source-interface
  551. ip max-frag-count
  552. ip name-server
  553. ip proxy-arp
  554. ip route
  555. ip source-route
  556. ip unknown-unicast
  557. ipv4 unicast-host-route
  558. ip unreachables
  559. load-balance
  560. load-balance hg
  561. management route
  562. show arp
  563. show arp retries
  564. show hosts
  565. show ip cam stack-unit
  566. show ip fib stack-unit
  567. show ip flow
  568. show ip interface
  569. show ip management-route
  570. show ipv6 management-route
  571. show ip protocols
  572. show ip route
  573. show ip route list
  574. show ip route summary
  575. show ip traffic
  576. show tcp statistics
  577. IPv6 Basics
  578. clear ipv6 route
  579. maximum dynamic-routes-ipv6
  580. show cam-ipv6 extended-prefix
  581. ipv6 nd disable-reachable-timer
  582. ipv6 route
  583. show ipv6 route
  584. IPv6 Access Control Lists (IPv6 ACLs)
  585. ipv6 control-plane egress-filter
  586. ipv6 access-group
  587. Intermediate System to Intermediate System (IS-IS)
  588. adjacency-check
  589. advertise
  590. area-password
  591. clear config
  592. clear isis
  593. clns host
  594. debug isis
  595. debug isis local-updates
  596. debug isis snp-packets
  597. debug isis spf-triggers
  598. debug isis update-packets
  599. default-information originate
  600. distance
  601. distribute-list in
  602. distribute-list out
  603. distribute-list redistributed-override
  604. domain-password
  605. graceful-restart ietf
  606. graceful-restart restart-wait
  607. graceful-restart t1
  608. graceful-restart t2
  609. graceful-restart t3
  610. hello padding
  611. ignore-lsp-errors
  612. ip router isis
  613. ipv6 router isis
  614. isis circuit-type
  615. isis csnp-interval
  616. isis hello-multiplier
  617. isis hello padding
  618. isis ipv6 metric
  619. isis metric
  620. isis network point-to-point
  621. isis password
  622. isis priority
  623. is-type
  624. lsp-gen-interval
  625. lsp-mtu
  626. lsp-refresh-interval
  627. max-area-addresses
  628. max-lsp-lifetime
  629. multi-topology
  630. passive-interface
  631. redistribute bgp
  632. router isis
  633. set-overload-bit
  634. show isis database
  635. show isis graceful-restart detail
  636. show isis hostname
  637. show isis neighbors
  638. show isis protocol
  639. show isis traffic
  640. spf-interval
  641. iSCSI Optimization
  642. iscsi aging time
  643. iscsi enable
  644. iscsi priority-bits
  645. iscsi target port
  646. show iscsi session
  647. show iscsi session detailed
  648. show run iscsi
  649. Link Aggregation Control Protocol (LACP)
  650. debug lacp
  651. lacp long-timeout
  652. lacp port-priority
  653. lacp system-priority
  654. port-channel-protocol lacp
  655. show lacp
  656. Layer
  657. mac-address-table aging-time
  658. mac-address-table static
  659. mac-address-table station-move refresh-arp
  660. mac learning-limit
  661. mac learning-limit learn-limit-violation
  662. mac learning-limit mac-address-sticky
  663. mac learning-limit station-move-violation
  664. mac learning-limit reset
  665. show mac-address-table
  666. show mac-address-table aging-time
  667. show mac learning-limit
  668. Virtual LAN (VLAN) Commands
  669. default-vlan disable
  670. name
  671. show vlan
  672. tagged
  673. track ip
  674. untagged
  675. Far-End Failure Detection (FEFD)
  676. fefd
  677. fefd disable
  678. fefd interval
  679. fefd mode
  680. fefd-global interval
  681. fefd-global
  682. show fefd
  683. Link Layer Discovery Protocol (LLDP)
  684. advertise dot3-tlv
  685. advertise interface-port-desc
  686. clear lldp counters
  687. clear lldp neighbors
  688. debug lldp interface
  689. hello
  690. mode
  691. multiplier
  692. protocol lldp (Configuration)
  693. show lldp neighbors
  694. show lldp statistics
  695. LLDP-MED Commands
  696. advertise med guest-voice
  697. advertise med guest-voice-signaling
  698. advertise med location-identification
  699. advertise med power-via-mdi
  700. advertise med softphone-voice
  701. advertise med streaming-video
  702. advertise med video-conferencing
  703. advertise med video-signaling
  704. advertise med voice
  705. advertise med voice-signaling
  706. Microsoft Network Load Balancing
  707. mac-address-table static (for Multicast MAC Address)
  708. ip vlan-flooding
  709. Multicast Source Discovery Protocol (MSDP)
  710. clear ip msdp sa-cache
  711. clear ip msdp statistic
  712. ip msdp cache-rejected-sa
  713. ip msdp default-peer
  714. ip msdp log-adjacency-changes
  715. ip msdp originator-id
  716. ip msdp peer
  717. ip msdp redistribute
  718. ip msdp sa-filter
  719. ip msdp sa-limit
  720. ip msdp shutdown
  721. show ip msdp
  722. show ip msdp sa-cache rejected-sa
  723. Multiple Spanning Tree Protocol (MSTP)
  724. hello-time
  725. max-age
  726. msti
  727. protocol spanning-tree mstp
  728. revision
  729. show spanning-tree mst configuration
  730. show spanning-tree msti
  731. spanning-tree
  732. tc-flush-standard
  733. Multicast
  734. ip mroute
  735. ip multicast-limit
  736. ip multicast-routing
  737. mtrace
  738. show ip mroute
  739. show ip rpf
  740. Neighbor Discovery Protocol (NDP)
  741. clear ipv6 neighbors
  742. debug ipv6 nd ra–guard
  743. device–role
  744. ipv6 nd ra–guard attach–policy
  745. ipv6 nd ra–guard enable
  746. ipv6 neighbor
  747. managed-config-flag
  748. match ra
  749. other–config–flag
  750. reachable–time
  751. retrans-time
  752. router–preference maximum
  753. show ipv6 nd ra–guard policy
  754. show ipv6 neighbors
  755. trusted–port
  756. Object Tracking
  757. delay
  758. show running-config track
  759. show track
  760. threshold metric
  761. track interface ip routing
  762. track interface line-protocol
  763. track ip route metric threshold
  764. track ip route reachability
  765. track resolution ip route
  766. IPv6 Object Tracking Commands
  767. show track ipv6 route
  768. track interface ipv6 routing
  769. track ipv6 route metric threshold
  770. track ipv6 route reachability
  771. track resolution ipv6 route
  772. area default-cost
  773. area nssa
  774. area range
  775. area stub
  776. auto-cost
  777. clear ip ospf
  778. clear ip ospf statistics
  779. debug ip ospf
  780. distance ospf
  781. fast-convergence
  782. flood-2328
  783. graceful-restart grace-period
  784. graceful-restart helper-reject
  785. graceful-restart mode
  786. graceful-restart role
  787. ip ospf auth-change-wait-time
  788. ip ospf authentication-key
  789. ip ospf cost
  790. ip ospf dead-interval
  791. ip ospf hello-interval
  792. ip ospf message-digest-key
  793. ip ospf mtu-ignore
  794. ip ospf network
  795. ip ospf priority
  796. ip ospf retransmit-interval
  797. ip ospf transmit-delay
  798. log-adjacency-changes
  799. mib-binding
  800. network area
  801. redistribute isis
  802. router-id
  803. router ospf
  804. show ip ospf
  805. show ip ospf asbr
  806. show ip ospf database
  807. show ip ospf database asbr-summary
  808. show ip ospf database external
  809. show ip ospf database network
  810. show ip ospf database nssa-external
  811. show ip ospf database opaque-area
  812. show ip ospf database opaque-as
  813. show ip ospf database opaque-link
  814. show ip ospf database router
  815. show ip ospf database summary
  816. show ip ospf interface
  817. show ip ospf neighbor
  818. show ip ospf routes
  819. show ip ospf statistics
  820. show ip ospf timers rate-limit
  821. show ip ospf topology
  822. summary-address
  823. timers spf
  824. timers throttle lsa all
  825. timers throttle lsa arrival
  826. OSPFv3 Commands
  827. area encryption
  828. debug ipv6 ospf bfd
  829. debug ipv6 ospf packet
  830. debug ipv6 ospf spf
  831. ipv6 ospf area
  832. ipv6 ospf authentication
  833. ipv6 ospf cost
  834. ipv6 ospf dead-interval
  835. ipv6 ospf encryption
  836. ipv6 ospf graceful-restart helper-reject
  837. ipv6 ospf hello-interval
  838. ipv6 ospf priority
  839. max-metric router-lsa
  840. show crypto ipsec policy
  841. show crypto ipsec sa ipv6
  842. show ipv6 ospf database
  843. show ipv6 ospf interface
  844. show ipv6 ospf neighbor
  845. Policy-based Routing (PBR)
  846. ip redirect-group
  847. ip redirect-list
  848. redirect
  849. show cam pbr
  850. show ip redirect-list
  851. PIM-Sparse Mode (PIM-SM)
  852. clear ip pim tib
  853. debug ip pim
  854. ip pim bsr-border
  855. ip pim bsr-candidate
  856. ip pim dr-priority
  857. ip pim join-filter
  858. ip pim neighbor-filter
  859. ip pim query-interval
  860. ip pim register-filter
  861. ip pim rp-address
  862. ip pim rp-candidate
  863. ip pim sparse-mode
  864. ip pim sparse-mode sg-expiry-timer
  865. ip pim ssm-range
  866. ip pim spt-threshold
  867. show ip pim bsr-router
  868. show ip pim interface
  869. show ip pim neighbor
  870. show ip pim rp
  871. show ip pim ssm-range
  872. show ip pim summary
  873. Port Monitoring
  874. erpm
  875. monitor multicast-queue
  876. rate-limit
  877. show monitor session
  878. show running-config monitor session
  879. source (port monitoring)
  880. Private VLAN (PVLAN)
  881. ip local-proxy-arp
  882. private-vlan mode
  883. private-vlan mapping secondary-vlan
  884. switchport mode private-vlan
  885. Per-VLAN Spanning Tree Plus (PVST+)
  886. extend system-id
  887. protocol spanning-tree pvst
  888. show spanning-tree pvst
  889. spanning-tree pvst
  890. spanning-tree pvst err-disable
  891. vlan forward-delay
  892. vlan hello-time
  893. vlan max-age
  894. Quality of Service (QoS)
  895. service-class bandwidth-percentage
  896. service-class dot1p-mapping
  897. Per-Port QoS Commands
  898. rate police
  899. rate-shape
  900. service-class dynamic dot1p
  901. Policy-Based QoS Commands
  902. buffer-stats-snapshot
  903. class-map
  904. clear qos statistics
  905. match ip access-group
  906. match ip dscp
  907. match ip precedence
  908. match mac access-group
  909. match mac dot1p
  910. match mac vlan
  911. policy-aggregate
  912. policy-map-input
  913. policy-map-output
  914. qos-policy-input
  915. qos-policy-output
  916. rate-police
  917. service-policy input
  918. service-policy output
  919. service-queue
  920. show qos class-map
  921. show qos policy-map
  922. show qos policy-map-input
  923. show qos policy-map-output
  924. show qos qos-policy-input
  925. show qos qos-policy-output
  926. show qos statistics
  927. show qos statistics wred-ecn
  928. show qos wred-profile
  929. service-class buffer shared-threshold-weight
  930. threshold
  931. trust
  932. wred
  933. wred ecn
  934. wred weight
  935. wred-profile
  936. rate shape
  937. service-pool wred
  938. DSCP Color Map Commands
  939. qos dscp-color-map
  940. qos dscp-color-policy
  941. show qos dscp-color-policy
  942. Routing Information Protocol (RIP)
  943. auto-summary
  944. debug ip rip
  945. ip poison-reverse
  946. ip rip receive version
  947. ip rip send version
  948. ip split-horizon
  949. neighbor
  950. offset-list
  951. output-delay
  952. router rip
  953. show ip rip database
  954. show running-config rip
  955. timers basic
  956. version
  957. Remote Monitoring (RMON)
  958. rmon alarm
  959. rmon collection history
  960. rmon collection statistics
  961. rmon event
  962. rmon hc-alarm
  963. show rmon
  964. show rmon alarms
  965. show rmon events
  966. show rmon hc-alarm
  967. show rmon history
  968. show rmon log
  969. show rmon statistics
  970. Rapid Spanning Tree Protocol (RSTP)
  971. debug spanning-tree rstp
  972. forward-delay
  973. show spanning-tree rstp
  974. spanning-tree rstp
  975. Security
  976. aaa accounting suppress
  977. accounting
  978. aaa radius group
  979. Authorization and Privilege Commands
  980. aaa authorization commands
  981. aaa authorization config-commands
  982. aaa authorization exec
  983. privilege level (LINE mode)
  984. Obscure Password Commands
  985. Authentication and Password Commands
  986. aaa authentication login
  987. aaa reauthenticate enable
  988. enable password
  989. enable restricted
  990. enable secret
  991. login authentication
  992. password
  993. password-attributes
  994. secure-cli enable
  995. show privilege
  996. show users
  997. timeout login response
  998. username
  999. RADIUS Commands
  1000. ip radius source-interface
  1001. radius-server deadtime
  1002. radius-server group
  1003. radius-server vrf
  1004. radius-server key
  1005. radius-server retransmit
  1006. radius-server timeout
  1007. TACACS+ Commands
  1008. ip tacacs source-interface
  1009. tacacs-server group
  1010. tacacs-server host
  1011. tacacs-server key
  1012. tacacs-server vrf
  1013. Port Authentication (802.1X) Commands
  1014. dot1x max-eap-req
  1015. SSH and SCP Commands
  1016. crypto key zeroize rsa
  1017. debug ip ssh
  1018. ip scp topdir
  1019. ip ssh challenge–response–authentication
  1020. ip ssh connection-rate-limit
  1021. ip ssh hostbased-authentication
  1022. ip ssh key-size
  1023. ip ssh rekey
  1024. ip ssh pub-key-file
  1025. ip ssh rhostsfile
  1026. ip ssh rsa-authentication (Config)
  1027. ip ssh server
  1028. ip ssh server vrf
  1029. ip ssh source-interface
  1030. show crypto
  1031. show ip ssh
  1032. show ip ssh client-pub-keys
  1033. show ip ssh rsa-authentication
  1034. Secure DHCP Commands
  1035. ip dhcp relay
  1036. ip dhcp source-address-validation
  1037. ip dhcp snooping vlan
  1038. Role-Based Access Control Commands
  1039. role
  1040. show role
  1041. show userroles
  1042. userrole
  1043. ICMP Vulnerabilities
  1044. drop icmp
  1045. Service Provider Bridging
  1046. protocol-tunnel
  1047. protocol-tunnel destination-mac
  1048. protocol-tunnel rate-limit
  1049. show protocol-tunnel
  1050. sFlow
  1051. sflow collector
  1052. sflow enable (Global)
  1053. sflow ingress-enable
  1054. sflow extended-switch enable
  1055. sflow max-header-size extended
  1056. sflow polling-interval (Interface)
  1057. sflow sample-rate (Global)
  1058. sflow sample-rate (Interface)
  1059. show sflow
  1060. Simple Network Management Protocol (SNMP) and Syslog
  1061. show snmp engineID
  1062. show snmp group
  1063. show snmp user
  1064. snmp ifmib ifalias long
  1065. snmp-server community
  1066. snmp-server contact
  1067. snmp-server enable traps
  1068. snmp-server engineID
  1069. snmp-server group
  1070. snmp-server host
  1071. snmp-server location
  1072. snmp-server trap-source
  1073. snmp-server user
  1074. snmp-server user (for AES128-CFB Encryption)
  1075. snmp-server view
  1076. snmp-server vrf
  1077. snmp trap link-status
  1078. Syslog Commands
  1079. clear logging auditlog
  1080. default logging console
  1081. default logging monitor
  1082. logging
  1083. logging buffered
  1084. logging console
  1085. logging extended
  1086. logging history
  1087. logging history size
  1088. logging monitor
  1089. logging on
  1090. logging synchronous
  1091. logging trap
  1092. logging version
  1093. show logging auditlog
  1094. show logging driverlog stack-unit
  1095. terminal monitor
  1096. SNMP Traps
  1097. Storm Control
  1098. polling-interval
  1099. disable storm-control pfc
  1100. queue-drop backoff-force
  1101. storm-control pfc in queue-drop-state clear
  1102. clear storm-control pfc drop-counters
  1103. show storm-control pfc statistics
  1104. clear storm-control pfc statistics
  1105. show storm-control multicast
  1106. show storm-control unknown-unicast
  1107. storm-control broadcast (Configuration)
  1108. storm-control broadcast (Interface)
  1109. storm-control multicast (Configuration)
  1110. storm-control multicast (Interface)
  1111. storm-control unknown-unicast (Configuration)
  1112. storm-control unknown-unicast (Interface)
  1113. Spanning Tree Protocol (STP)
  1114. bpdu-destination-mac-address
  1115. debug spanning-tree
  1116. protocol spanning-tree
  1117. SupportAssist
  1118. support-assist
  1119. support-assist activity
  1120. SupportAssist Commands
  1121. contact-person
  1122. SupportAssist Activity Commands
  1123. action-manifest install
  1124. action-manifest remove
  1125. address
  1126. street-address
  1127. SupportAssist Person Commands
  1128. preferred-method
  1129. time-zone
  1130. show eula-consent
  1131. System Time and Date
  1132. clock summer-time recurring
  1133. clock timezone
  1134. debug ntp
  1135. ntp authenticate
  1136. ntp broadcast client
  1137. ntp disable
  1138. ntp master <stratum
  1139. ntp offset-threshold
  1140. ntp source
  1141. ntp trusted-key
  1142. ntp authentication-key
  1143. show clock
  1144. show ntp associations
  1145. show ntp vrf associations
  1146. Uplink Failure Detection (UFD)
  1147. debug uplink-state-group
  1148. downstream auto-recover
  1149. show running-config uplink-state-group
  1150. show uplink-state-group
  1151. upstream
  1152. Tunneling
  1153. ipv6 unnumbered
  1154. tunnel allow-remote
  1155. tunnel destination
  1156. tunnel flow-label
  1157. tunnel hop-limit
  1158. tunnel keepalive
  1159. tunnel-mode
  1160. tunnel source
  1161. VLAN Stacking
  1162. dei enable
  1163. dei mark
  1164. member
  1165. stack-unit module
  1166. vlan-stack access
  1167. vlan-stack dot1p-mapping
  1168. vlan-stack trunk
  1169. no ip address
  1170. Virtual Routing and Forwarding (VRF)
  1171. ipv6 unknown-unicast
  1172. ip vrf forwarding
  1173. ip route-export
  1174. ip route-import
  1175. ipv6 route-export
  1176. ipv6 route-import
  1177. match source-protocol
  1178. interface management
  1179. maximum dynamic-routes
  1180. show run vrf
  1181. VLT Proxy Gateway
  1182. proxy-gateway static
  1183. peer-domain-link port-channel exclude-vlan
  1184. proxy-gateway peer-timeout
  1185. vlt-peer-mac transmit
  1186. show vlt-proxy-gateway
  1187. Virtual Link Trunking (VLT)
  1188. back-up destination
  1189. clear vlt statistics
  1190. delay-restore
  1191. lacp ungroup member-independent
  1192. multicast peer-routing timeout
  1193. peer-link port-channel
  1194. peer-routing
  1195. primary-priority
  1196. show vlt brief
  1197. show vlt backup-link
  1198. show vlt counters
  1199. show vlt detail
  1200. show vlt inconsistency
  1201. show vlt role
  1202. show vlt statistics
  1203. show vlt statistics igmp-snoop
  1204. vlt domain
  1205. vlt-peer-lag port-channel
  1206. Virtual Extensible LAN (VXLAN)
  1207. clear mac-address-table dynamic all
  1208. debug vxlan
  1209. fail-mode
  1210. local-vtep-ip
  1211. remote-vtep-ip
  1212. vni-profile
  1213. vxlan-instance (VAP)
  1214. vxlan-instance static
  1215. vxlan-vnid
  1216. show vxlan vxlan-instance
  1217. show vxlan vxlan-instance logical network
  1218. show vxlan vxlan-instance physical-locator
  1219. show vxlan vxlan-instance statistics interface
  1220. show vxlan vxlan-instance statistics remote-vtep-ip
  1221. show vxlan vxlan-instance unicast-mac-remote
  1222. show vxlan vxlan-instance vtep-vni-map
  1223. Virtual Router Redundancy Protocol (VRRP)
  1224. authentication-type
  1225. clear counters vrrp
  1226. debug vrrp
  1227. hold-time
  1228. preempt
  1229. show vrrp
  1230. track
  1231. virtual-address
  1232. vrrp delay minimum
  1233. vrrp delay reload
  1234. vrrp-group
  1235. IPv6 VRRP Commands
  1236. debug vrrp ipv6
  1237. show vrrp ipv6
  1238. vrrp-ipv6-group
  1239. X.509v3
  1240. crypto ca-cert install
  1241. crypto cert delete
  1242. crypto cert install
  1243. crypto x509 ocsp
  1244. debug crypto
  1245. logging secure
  1246. crypto x509 ca-keyid
  1247. ocsp-server
  1248. show crypto ca-cert
  1249. show crypto cert
S6100 first page preview

S6100

Brand: Dell | Category: Switch
Related products
S6000-ONEMC PowerSwitch S6100-ONS3100 SeriesX1000 SeriesSMA 200S4100-ON SeriesSMA 400N1100-ONN3100-ONN2100-ON
Dell categories
More Dell categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine