Dell Studio 1745 Service Manual

Also see for Studio 1745: User guide Setup guide Setup guide Service manual

Dell Studio 1745 Service Manual Manual pdf 28 page image

Back to Contents PageThermal FanDell Studio™ 1745/1747 Service ManualRemoving the Thermal FanReplacing the Thermal FanRemoving the Thermal Fan1. Follow the procedures in Before You Begin.2. Remove the battery (see Removing the Battery).3. Remove the center control cover (see Removing the Center Control Cover).4. Remove the keyboard (see Removing the Keyboard).5. Remove the media controls board (see Removing the Media Controls Board).6. Remove the palm rest (see Removing the Palm Rest).7. Disconnect the thermal fan cable from the thermal fan cable connector on the system board.8. Remove the two screws that secure the thermal fan to the computer base.9. Lift the thermal fan along with the cable, off the computer base.Replacing the Thermal Fan1. Follow the procedures in Before You Begin.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside thecomputer.1 thermal fan cable connector 2 thermal fan3 screws (2)