Dell Studio 1745 Service Manual

Also see for Studio 1745: User guide Setup guide Setup guide Service manual

Dell Studio 1745 Service Manual Manual pdf 46 page image

15. Starting at the right or left of the palm rest, use your fingers to separate the palm rest from the computer base.16. Release the subwoofer assembly cable through the slot in the palm rest.17. Lift the palm rest off the computer base.Replacing the Palm Rest1. Follow the procedures in Before You Begin.2. Guide the subwoofer assembly cable through the slot in the palm rest.3. Align the palm rest with the computer base and gently snap the palm rest into place.4. Route the antenna cables, display cable, power button cable, and subwoofer assembly cable through the routing guides.5. Connect the display cable, camera cable, power button cable, and the touch pad cable to the respective system board connectors.6. Replace the six screws on the palm rest.7. Replace the media controls board (see Replacing the Media Controls Board).8. Replace the keyboard (see Replacing the Keyboard).9. Replace the center control cover (see Replacing the Center Control Cover).10. Replace the twelve screws at the bottom of the computer.11. Connect the antenna cables to the Mini-Card(s) (see Replacing the Mini-Card).12. Connect the subwoofer assembly cable to the subwoofer assembly cable connector on the system board.13. Replace the base cover (see Replacing the Base Cover).14. Replace the battery (see Replacing the Battery).CAUTION: Carefully separate the palm rest from the computer base to avoid damage to the palm rest.1 touch pad cable connector 2 palm rest3 display cable connector 4 camera cable connector5 power button cable connector 6 subwoofer assembly cable slot