Dell Studio XPS 8100 Service Manual

Also see for Studio XPS 8100: User guide Setup guide Specifications

Processor Cache L1 Displays the processor L1 cache sizeProcessor Cache L2 Displays the processor L2 cache sizeProcessor Cache L3 Displays the processor L3 cache sizeMemory Installed Indicates the amount of installed memory in MBMemory Available Indicates the amount of memory available in MBMemory Speed Indicates the memory speed in MHz.Memory Technology Indicates the memory technology; DDR3Standard CMOS FeaturesSystem Time Displays the current time in hh:mm:ss formatSystem Date Displays the current date in mm:dd:yy formatSATA1 Displays the SATA1 drive integrated in the computerSATA2 Displays the SATA2 drive integrated in the computerSATA3 Displays the SATA3 drive integrated in the computer.SATA4 Displays the SATA4 drive integrated in the computereSATA Displays the eSATA drive integrated in the computerAdvanced BIOS FeaturesCPU Feature l Hyper-Threading — Enabled or Disabled (Enabled by default)l Intel SpeedStep™ Tech — Enabled or Disabled (Enabled by default)l Intel® C-STATE Tech — Enabled or Disabled (Enabled by default)l Intel® Virtualization Tech — Enabled or Disabled (Enabled by default)l Limit CPUID Value — Enabled or Disabled (Disabled by default)l CPU XD Support — Enabled or Disabled (Enabled by default)l Multi Core Support — All or 1 or 2 (All by default)USB Device Setting l USB Controller — Enabled or Disabled (Enabled by default)l USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)Advanced Chipset FeaturesOnboard Audio Controller Enabled or Disabled (Enabled by default)SATA Mode ATA/RAID (RAID by default)Onboard LAN Controller Enabled or Disabled (Enabled by default)Onboard LAN Boot ROM Enabled or Disabled (Disabled by default)Onboard 1394 Controller Enabled or Disabled (Enabled by default)Memory Remap feature Enabled or Disabled (Enabled by default)Boot Device ConfigurationBoot Settings Configuration Configures the settings during system boot.Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected1st Boot Device Specifies the boot sequence from the available devicesRemovable; CD/DVD; Hard Drive; Disabled (Removable by default)2nd Boot Device Specifies the boot sequence from the available devicesRemovable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)3rd Boot Device Specifies the boot sequence from the available devicesRemovable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).Boot Other Device No; Yes (Yes by default)Power Management SetupACPI Suspend Type Specifies the ACPI suspend type. The default is S3Remote Wake Up This option turns on the computer when you try to access the computer through the LAN (Enabled by default)AC Recovery Specifies the behavior of the computer after recovering from a power loss (Off by default)l On — The computer turns on after it recovers from a power failurel Off — The computer remains off.l Last — The computer returns to the power state it was in before the power failure