About Your Monitor | 17Plug and Play CapabilityYou can install the monitor in any Plug and Play-compatible system. The monitorautomatically provides the computer system with its Extended Display Identification Data(EDID) using Display Data Channel (DDC) protocols so the system can configure itselfand optimize the monitor settings. Most monitor installations are automatic; you canselect different settings if desired. For more information about changing the monitorsettings, see Operating the Monitor.Universal Serial Bus (USB) InterfaceThis section gives you information about the USB ports that are available on the monitor.Transfer Speed Data Rate Power Consumption*Super-speed 5 Gbps 4.5 W (Max, each port)High speed 480 Mbps 4.5 W (Max, each port)Full speed 12 Mbps 4.5 W (Max, each port)NOTE: This monitor is High-Speed USB 3.0 compatible.* Up to 2A on USB downstream port (port with lightning icon) with BC1.2compliance devices or normal USB devices.USB Upstream ConnectorPin Number 4-pin Side of the Connector1 VCC2 D-3 D+4 GND5 SSTX-6 SSTX+7 GND