Dell UltraSharp UP3218K User Manual

Also see for UltraSharp UP3218K: Quick start guide Quick start guide Service manual Teardown Guide

Dell UltraSharp UP3218K User Manual Manual pdf 20 page image

20 | Setting Up the MonitorNOTE: To use the Display Rotation function (Landscape versus Portrait view) withyour Dell computer, you require an updated graphics driver that is not included withthis monitor. To download the graphics driver, go to www.dell.com/support and seethe Download section for Video Drivers for latest driver updates.NOTE: When in the Portrait View Mode, you may experience performancedegradation in graphic-intensive applications (3D Gaming and etc.).Adjusting the Rotation Display Settings of Your SystemAfter you have rotated your monitor, you need to complete the procedure below toadjust the Rotation Display Settings of your System.NOTE: If you are using the monitor with a non-Dell computer, you need to go thegraphics driver website or your computer manufacturer website for information onrotating the ’contents’ on your display.To adjust the Rotation Display Settings:1 Right-click on the desktop and click Properties.2 Select the Settings tab and click Advanced.3 If you have an AMD graphics card, select the Rotation tab and set the preferredrotation.4 If you have an nVidia graphics card, click the nVidia tab, in the left-hand columnselect NVRotate, and then select the preferred rotation.5 If you have an Intel® graphics card, select the Intel graphics tab, click GraphicProperties, select the Rotation tab, and then set the preferred rotation.NOTE: If you do not see the rotation option or it is not working correctly, go towww.dell.com/support and download the latest driver for your graphics card.Connecting Your MonitorWARNING: Before you begin any of the procedures in this section, follow theSafety Instructions.To connect your monitor to the computer:1 Turn off your computer.2 Connect the DP-DP/USB cable from your monitor to the computer. (Verticallyextend and tilt the monitor completely to rotate it for cable connection. SeeRotating the Monitor.)3 Switch on your monitor.4 Select the correct input source at Monitor OSD Menu and turn on yourcomputer.NOTE: UP3218K default setting is DP 1.4. some older DP 1.2 Graphic card may notdisplay normally. Please refer to “product specific problems – No image when usingDP connection to the PC” to change default setting.