Printing labels1 Load the label sheets in the printer.2 Send the print job:a With a document open, click File Print.b Click Properties, Preferences, Options, or Setup.c From the Paper Size list of the Print Setup tab, choose a paper size that matches the size of the label sheet. Ifno paper size matches the label sheet size, then set a custom size.If necessary, choose the appropriate type of paper from the Paper Type list.d Click OK to close any printer software dialogs.e Click OK or Print.Tips on loading label sheets• Make sure the top of the label sheet feeds into the printer first.• Make sure the adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.• Make sure the paper guide or paper guides rest against the edges of the label sheet.• Use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off duringprinting, resulting in a paper jam.Note: Labels require more drying time. Remove each label sheet as it exits, and then allow it to dry to avoid inksmudging.Printing on custom-size paperBefore beginning these instructions, load the custom-size paper in the printer.1 With a document open, click File Print.2 Click Properties, Preferences, Options, or Setup.3 From the Paper Size list of the Print Setup tab, select Custom Size.The Define Custom Paper Size dialog appears.4 Set the paper size.5 Select the measurement units to use (inches or millimeters).6 Click OK to close any printer software dialogs.7 Click OK or Print.Printing on both sides of the paper (duplexing)manually1 With a document open, click File Print.2 Click Properties, Preferences, Options, or Setup.3 Click the Advanced tab.Printing33
