If you are using WPA securityA valid WPA passphrase is:• From 8 to 63 ASCII characters. ASCII characters in a WPA passphrase are case-sensitive.or• Exactly 64 hexadecimal characters. Hexadecimal characters are A-F, a-f, and 0-9.If your wireless network is not using security, then you will not have a security key. Using a wireless network withno security is not recommended because it can allow intruders to use your network resources without your consent.MOVE YOUR PRINTERMove the printer closer to the wireless access point (wireless router). Although the possible distance betweendevices in 802.11b or 802.11g networks is 300 feet, the maximum range for optimal performance is generally100-150 feet.You can find the strength of the network signal on the printer network setup page.C HECK MAC ADDRESSIf your network uses MAC address filtering, make sure that you include the MAC address of the printer in the MACaddress filter list. This will allow the printer to operate on the network.Wi-Fi indicator light is blinking orange during installationWhen the Wi-Fi indicator light is blinking orange, it indicates that the printer has been set up for wireless networkingbut cannot connect to the network for which it has been configured. The printer may be unable to join the networkbecause of interference, its distance from the wireless access point (wireless router), or until its settings are changed.These are possible solutions. Try one or more of the following:MAKE SURE THE ACCESS POINT IS ONCheck the access point and, if necessary, turn it on.MOVE YOUR ACCESS POINT TO MINIMIZE INTERFERENCEThere may be temporary interference from other devices such as microwave ovens or other appliances, cordlessphones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely tothese devices.MOVE THE COMPUTER AND/ OR PRINTER CLOSER TO THE WIRELESS ACCESS POINT ( WIRELESSROUTER )Move the computer and/or printer closer to the access point. Although the possible distance between devices in802.11b or 802.11g networks is 300 feet, the maximum range for optimal performance is generally 100–150 feet.You can find the signal strength of the network on the network setup page.Troubleshooting95
