64 Using a BatteryTo enter hibernate mode in Windows XP, click the Start button, click Turn offcomputer, press and hold , and then click Hibernate.To enter hibernate mode in Windows Vista, click the Windows Vista Startbutton , and then click Hibernate.Depending on how you set the power management options in the PowerOptions Properties window or the QuickSet Power Management Wizard, youmay also use one of the following methods to enter hibernate mode:• Press the power button.• Close the display.• Press .NOTE: Some ExpressCards may not operate correctly after the computer exitshibernate mode. Remove and reinsert the card (see "Removing an ExpressCard orBlank" on page 93), or simply restart (reboot) your computer.To exit hibernate mode, press the power button. The computer may take ashort time to exit hibernate mode. You cannot make the computer exithibernate mode by pressing a key or touching the touch pad. For moreinformation on hibernate mode, see the documentation that came with youroperating system.Configuring Power Management SettingsYou can use Dell QuickSet or Windows Power Options to configure the powermanagement settings on your computer.• For information on how to use the Dell QuickSet Power Managementwizard, right-click the QuickSet icon in the notification area, click Help,and then select Power Management.Accessing Power Options PropertiesWindows XPClick Start→ Control Panel→ Performance and Maintenance, and thenclick Power Options
